Installation guide

For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: c-ch2 Overview of Server Installation.doc Last Saved On: 7/11/00 9:03 AM
Chapter 2
Overview of Server Installation
The following instructions are provided as an overview for first-time
installation of your ProLiant ML350. If you have any problems, contact your
Compaq authorized reseller.
WARNING: To reduce the risk of electric shock or damage to the equipment:
■ Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet that is
easily accessible at all times.
■ Disconnect power from the server by unplugging the power cord from
either the electrical outlet or the server.
■ Do not place anything on power cords or cables. Arrange them so that no
one can accidentally step on or trip over them. Do not pull on a cord or
cable. When unplugging from the electrical outlet, grasp the cord by the
plug.
CAUTION: Electrostatic discharge can damage electronic components. Be sure
you are properly grounded (earthed) before beginning any installation procedure.
See Appendix B, “Electrostatic Discharge (ESD),” for more information.