Installation guide

C-4 Compaq ProLiant ML350 Setup and Installation Guide
For use with 1-GHz or greater Intel Pentium III processor-based server models only
Compaq Confidential – Need to Know Required
Writer: Doug Warren Project: Compaq ProLiant ML350 Setup and Installation Guide Comments:
Part Number: 201345-001 File Name: i-appc Switches and Jumpers.doc Last Saved On: 7/11/00 10:16 AM
SCSI Device Jumper Settings
No two SCSI devices connected to the same SCSI controller can have the
same SCSI ID. If another SCSI device is connected to the same controller,
check its SCSI ID before beginning the installation procedure for the
additional device. The SCSI ID is set by jumpers ID 3, ID 2, ID 1, and ID 0
located on each SCSI device.