User guide
Table Of Contents
- HP ProLiant ML330 G6 Server User Guide
- Abstract
- Notice
- Contents
- Component identification
- Operations
- Setup
- Hardware options installation
- Introduction
- Processor option
- Memory options
- Redundant hot-plug power supply option
- Redundant fan assembly option
- SAS or SATA hard drive option
- Expansion hard drive cage option (hot-plug)
- Expansion hard drive cage option (non-hot-plug)
- Removable media devices
- Expansion board options
- PCI-X extender board option
- Storage controller option
- Battery-backed write cache battery pack option
- FBWC module and capacitor pack option
- SAS controller option
- Dedicated iLO 2 port module option
- HP Trusted Platform Module option
- Cabling
- Configuration and utilities
- Troubleshooting
- Battery replacement
- Regulatory compliance notices
- Regulatory compliance identification numbers
- Federal Communications Commission notice
- Declaration of conformity for products marked with the FCC logo, United States only
- Modifications
- Cables
- Canadian notice (Avis Canadien)
- European Union regulatory notice
- Disposal of waste equipment by users in private households in the European Union
- Japanese notice
- BSMI notice
- Korean notice
- Chinese notice
- Laser compliance
- Battery replacement notice
- Taiwan battery recycling notice
- Power cord statement for Japan
- Electrostatic discharge
- Specifications
- Technical support
- Acronyms and abbreviations
- Index

Specifications 121
Specifications
Environmental specifications
Specification Value
Temperature
Operating
1
10°C to 35°C (50°F to 90°F)
Non-operating
30°C to 60°C (-22°F to 140°F)
Maximum rate of temperature
change
Operating
2,3
10°C/hr (18°F/hr)
Non-operating
20°C/hr (36°F/hr)
Relative humidity
(noncondensing)***
Operating
10% to 90%
Non-operating
5% to 95%
Maximum wet bulb temperature
(non-condensing)
Operating
28
°
C (82.4
°
F)
Non-operating
38.7°C (101.7°F)
Altitude
Operating
2
3,050 m (10,000 ft)
Non-operating
9144 m (30,000 ft)
Maximum rate of altitude change
Operating
3,000 m (10,000 ft)
Non-operating
9,144 m (30,000 ft)
1
All temperature ratings shown are for sea level. An altitude derating of 1°C per 300 m (1.8°F per 1,000 ft) to 3048 m
(10,000 ft) is applicable. No direct sunlight is allowed.
2
The type and number of options installed can limit the upper limit.
3
System performance may be reduced if operating with a fan fault above 30ºC (86ºF).
Mechanical specifications
Specification Value
Height
20.0 cm (7.87 in)
Depth (without bezel)
42.70 cm (16.81 in)
Width
61.30 cm (24.13 in)
Weight (no drives installed)
16.04 kg (35.37 lb)