Specifications

Connectors, Switches, and LED Indicators 4-11
Each PCI Hot Plug button
is used to activate or deactivate its associated PCI Hot Plug slot.
Activating or deactivating a PCI Hot Plug slot can also be accomplished through the operating
system PCI Hot Plug software application. For more information, refer to the Compaq
ProLiant DL760 Server User Guide, and the “PCI Hot Plug Important Facts” section in the
online PCI Hot Plug Administration Guide on the server documentation CD.
1 2
3
Figure 4-9. PCI Hot Plug LED indicators in the I/O module
Table 4-8 shows the appropriate slot condition and status for each state of the two PCI Hot Plug
LEDs.
Table 4-8
PCI Hot Plug LED Indicators and Button
Green LED Amber LED
OK to Open Slot Condition and Status
On Off No Power is on. The slot does not require attention.
On On No Power is on. The slot requires attention. There may be a
problem with the slot, the PCI/PCI-X board, or the driver. Do NOT
open the slot release lever.
Refer to the IML and/or the PCI Hot Plug software application for
a description of the problem indicated.
Flashing Off No Power to the slot is being turned off or on. This process may
take several minutes. DO NOT open the slot release lever until
the green LED is completely off.
Off On Yes Power is off. You may replace or remove a board in this slot
depending on the operating system. (If Windows NT or Windows
2000, this device requires attention).
Off Off Yes Power is off. You can replace or remove the board in this slot
only.
PCI Hot Plug Button
Used to activate and deactivate the associated PCI Hot Plug slot.