Specifications

4-8 Compaq ProLiant DL760 Servers Maintenance and Service Guide
LED Indicators
This section contains graphics and tables showing LED locations and functions on the system
interconnect status indicators, hot-plug I/O fan, PCI Hot Plug LED Indicators, hot-plug power
supply, and hot-plug SCSI hard drive.
System Interconnect Status Indicator LEDs
Figure 4-6 and Table 4-7 show the location and identification of the system interconnect status
indicator LEDs.
1
3
5
7
9
11
13
15
17
Shutdown
P8
P7
P6
P5
P4
P3
P2
P1
Memory
9 VRM
Host Mod
I/O Mod
Media Mod
SCSI Bd 1
SCSI Bd 2
Reset
2
4
6
8
10
12
14
16
Figure 4-6. System interconnect status indicator LEDs
Table 4-7
System Interconnect Status Indicators
Indicator Component Indicator Component
Emergency shutdown Memory board
Processor – MP8 Processor Power Module
Processor – MP7 Processor and Memory Module
Processor – MP6 I/O module and fans
Processor – MP5 Media module
Processor – MP4 SCSI backplane 1
Processor – MP3 SCSI backplane 2
Processor – MP2 Reset
Processor – MP1
IMPORTANT: To check system interconnect status indicator LEDs, place the server in Standby mode
with the power supplies plugged in.