Specifications

2-50 Compaq ProLiant DL760 Servers Maintenance and Service Guide
I/O Module Central Support Bracket
To remove the I/O module central support bracket:
1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Remove the I/O module. See the sections on removing the I/O modules earlier in this
chapter.
3. Remove the fan cage assembly. See “Fan Cage Assembly” earlier in this chapter.
4. Loosen the thumbscrew securing the bracket to the chassis .
5. Remove the bracket .
2
1
Figure 2-45. Removing the I/O module central support bracket
Reverse steps 1 through 5 to replace the I/O module central support bracket.