Specifications

2-48 Compaq ProLiant DL760 Servers Maintenance and Service Guide

To remove a hot-plug fan from the server:

CAUTION: Never remove both hot-plug fans while the server is powered up. Overheating and

damage to hardware could result. If the appropriate Compaq software drivers are installed, the

operating system software will initiate a power shutdown in the event of overheating.

1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.

2. Open the top access panel. See “Top Access Panel” earlier in this chapter.

3. Press in the locking latches and remove the failed hot-plug fan (either 1 or 2) from the

module

Figure 2-43. Removing a hot-plug fan

Reverse steps 1 through 3 to replace a hot-plug fan.