Specifications

2-42 Compaq ProLiant DL760 Servers Maintenance and Service Guide
Table 2-7
Bus Distribution of PCI Hot Plug Slots.
Bus PCI Hot Plug Slot No Associated PCI Bus and Bus Speed
Primary
Slots through
PCI Bus 1 (64 Bit), 33-MHz
Secondary
Slots through
PCI-X Bus 2 (64 Bit), 50-MHz
Slots through
PCI Bus 2 (64-Bit), 33-MHz
Tertiary
Slots and
PCI-X Bus 3 (64 Bit), 100-MHz
Slots and
PCI Bus 3 (64-Bit), 33-MHz, 66-MHz
Note 1: All PCI-X Buses support PCI expansion boards at 33 MHz.
Note 2: The Bus speed will only run as fast as the slowest board installed.
NOTE: The I/O expansion board slots are numbered from right to left as you face the front of the server.
Removing the I/O Expansion Slot Cover
To remove the I/O expansion slot cover:
1. Press down on the top of the expansion slot release lever and push the lever up .
2. Remove the expansion slot cover .
1
3
2
Figure 2-37. Removing the I/O expansion slot cover
Reverse steps 1 and 2 to replace the I/O expansion slot cover.