Specifications

Removal and Replacement Procedures 2-11
Media Module
Mass storage in Compaq ProLiant DL760 servers is located in the media module. The media
module is capable of configuring a maximum of four 1-inch hot-plug Wide Ultra2 or
Wide Ultra3 SCSI hard drives. The media module supports two non-hot-plug media drive bays:
■ One third-height drive bay occupied by a 1.44-MB diskette drive
■ One third-height drive bay occupied by a 24X Max (or higher) IDE CD-ROM drive
Removing the Media Module
CAUTION: Removable media blank bezels and hot-plug drive cage blanking panels must be
installed over unused mass storage and removable media device bays to maintain proper
airflow.
To remove the media module from the server:
1. Perform the preparation procedures. See “Preparation Procedures” earlier in this chapter.
2. Push in the sides of the cam levers on the media module and rotate the top of the levers
downward
.
1
2
Figure 2-6. Removing the media module
WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
components to cool before touching them.