Specifications

Component identification 83
Item Description Status
3
UID LED and button Off = Deactivated
Solid Blue = Activated
Flashing Blue = System being remotely managed
4
Power On/Standby button
and system power LED
Off = Power cord not attached or power supply failure
Solid Amber = System is in standby; Power On/Standby Button
service is initialized.
Flashing Green = Power On/Standby Button has been pressed;
system is waiting to power on.
Solid Green = System on
Systems Insight Display LEDs
The HP Systems Insight Display LEDs represent the system board layout. The display enables diagnosis with
the access panel installed.
Item Description Status
1
Power cap Off = System is in standby, or no cap is set.
Solid green = Power cap applied
2
NIC link/activity Off = No link to network. If the power is off,
view the rear panel RJ-45 LEDs for status
("Rear panel LEDs and buttons" on page
86).
Flashing green = Network link and activity
Solid green = Network link