Specifications

Removal and replacement procedures 60

Install the heatsink.

3. Install the air baffle ("Air baffle" on page 34).

4. Install the access panel ("Access panel" on page 33).

5. Slide the server into the rack.

6. Connect each power cord to the server.

7. Connect each power cord to the power source.

8. Power up the server.

Processor

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the

internal system components to cool before touching them.

CAUTION: To prevent possible server malfunction and damage to the equipment, multiprocessor

configurations must contain processors with the same part number.

CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the

heatsink is removed from the processor after it has been installed.

CAUTION: To prevent possible server overheating, always populate processor socket 2 with a

processor and a heatsink or a processor socket cover and a heatsink blank.

CAUTION: To avoid thermal shutdown, all fans must be installed in a dual processor

configuration.