Specifications

Removal and replacement procedures 51

Remove the serial label pull tab, and retain it for the new front panel assembly.

6. Remove the air baffle ("Air baffle" on page 34).

7. Remove all drives ("Hot-plug drive" on page 39).

8. If installed, remove the optical drive ("Optical drive" on page 41).

9. Remove the fan cage ("Fan cage" on page 46).

10. Disconnect all cables from the front panel assembly.

IMPORTANT: If any cables in the front panel assembly need replacing, the entire front panel

assembly must be replaced.

11. Remove the four T-10 Torx screws from each side, and then remove the front panel assembly.

To replace the component, reverse the removal procedure.