Specifications

Removal and replacement procedures 50
5.
Remove the air baffle ("Air baffle" on page 34).
6. Remove the fan cage ("Fan cage" on page 46).
7. Remove the Systems Insight Display:
a. Remove the screw from the rear of the Systems Insight Display.
b. Disconnect the Systems Insight Display cable and the USB cable from the system board, and
disconnect the USB cable from the front of the Systems Insight Display.
c. Remove the Systems Insight Display.
To replace the component, reverse the removal procedure.
Front panel assembly
To remove the component:
1. Power down the server (on page 27).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove the server from the rack (on page 29).
4. Remove the access panel ("Access panel" on page 33).