Specifications

Removal and replacement procedures 48
Pull the FlexibleLOM toward the front of the server while removing it, to avoid catching it on the rear
chassis.
To replace the component:
1. Firmly seat the FlexibleLOM in the slot, and then tighten the thumbscrew.
2. Install the PCIe riser cage ("PCIe riser cage (primary)" on page 36).
3. Install the access panel ("Access panel" on page 33).
4. Slide the server into the rack.
5. Connect the LAN segment cables.
6. Connect each power cord to the server.
7. Connect each power cord to the power source.
8. Power up the server.