Specifications

Removal and replacement procedures 44
Power supply backplane
To remove the component:
1. Power down the server (on page 27).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Remove all power supplies ("AC power supply" on page 40).
4. Extend ("Extend the server from the rack" on page 28) or remove ("Remove the server from the rack" on
page 29) the server from the rack.
5. Remove the access panel ("Access panel" on page 33).
6. Disconnect the SATA cable.
7. Remove the power supply backplane.