Specifications

Removal and replacement procedures 31
2.
Open the cable management arm. Note that the cable management arm can be right-mounted or
left-mounted.
Release the full-length expansion board retainer
To remove the component:
1. Power down the server (on page 27).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Extend ("Extend the server from the rack" on page 28) or remove ("Remove the server from the rack" on
page 29) the server from the rack.
4. Remove the access panel ("Access panel" on page 33).
5. Release the full-length expansion board retainer.