Specifications

Removal and replacement procedures 70
o
Extend the server from the rack (on page 31).
o Remove the server from the rack (on page 33).
5. Remove the access panel ("Access panel" on page 36).
6. Remove the air baffle ("Air baffle" on page 40).
7. Remove the PCI riser cages ("PCI riser cage" on page 55).
8. Disconnect all cables connected to the system board.
9. Remove all DIMMs ("DIMMs" on page 47).
10. If installed, remove the heatsink blank ("Heatsink blank" on page 48).
11. Remove the heatsink:
a. Loosen one pair of diagonally opposite screws halfway, and then loosen the other pair of screws.
b. Completely loosen all screws in the same sequence.
c. Remove the heatsink from the processor backplate.