User guide

Hardware options installation 79
Label color Output
White
750 W -48 VDC
Green
1200 W
IMPORTANT: The DC power supply unit must only be installed by a qualified technician.
•
The 14 AWG green or yellow wire must be fastened to the metal enclosure with a screw and
a spring or star washer.
• When installing the DC power supply unit, the ground wire must be connected before the
positive or negative leads.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1. Unfasten the cable management solution to access the power supply bays.
2. Remove the EMI shield from the power supply bay.