Specifications

Removal and replacement procedures 36

Slide the lightpipe out of the chassis.

To replace the component, reverse the removal procedure.

Power converter module

To remove the component:

1. Power down the server (on page 20).

2. Extend or remove the server from the rack ("Extend the server from the rack" on page 19, "Remove

the server from the rack" on page 20).

3. Remove the access panel ("Access panel" on page 22).

4. Remove the front fan bracket ("Front fan bracket" on page 25).

IMPORTANT: For this procedure, you do not need to remove the hot-plug fans from the front fan bracket.

When reinstalling the front fan bracket, press the top of each fan to be sure it seats securely.

5. Remove all hot-plug power supplies ("Hot-plug power supply" on page 47).

6. Disconnect all power cables.

7. Remove the power converter module.