Installation guide

Setup and Installation in a Rack
11. Use the shipping bracket to secure the system in the rack for shipping:
a. Loosen the thumbscrew on the shipping bracket.
b. Slide the shipping bracket forward until it engages the storage system
chassis.
c. Tighten the thumbscrew.
Installing the Servers in the Rack
Follow the steps in this section if you are installing the servers into a rack with square
holes. If you are installing the servers into a rack with round holes, order the
appropriate rack installation option kit, and then refer to the installation instructions
that ship with the option kit for more information.
NOTE: The steps in this section work on most third-party racks with square holes. If they do
not work with the rack you are using, order the option kit for racks with round holes.
HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide 5-11
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: f-ch5 Setup and Installation in a Rack
Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 1:02 PM