Installation guide
Setup and Installation in a Rack
2. Use the instructions provided on the rack template to mark the rack for rail
locations.
WARNING: The storage system weight, as assembled for shipping, exceeds
22.7 kg (50 lb). Install the storage system in the lowest available position in the
rack.
IMPORTANT: Unless you are converting the rails for use in round-hole racks, do not remove
the pins from the ends of the rack rails. These load-bearing pins are designed to fit through the
holes without being removed.
NOTE: Identify the left (L) and right (R) rack rails by markings stamped into the sheet metal.
5-4 HP ProLiant DL380 Generation 3 Packaged Cluster Setup and Installation Guide
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: f-ch5 Setup and Installation in a Rack
Codename: Sopwith Part Number: 252621-003 Last Saved On: 9/17/03 1:02 PM