QuickSpecs

Form Factor
Form FactorForm Factor
Form Factor HP ProLiant e2000 G6 Chassis - 2U Chassis can support up to four DL170e server nodes in the 2U
chassis.
HP ProLiant DL170e G6 Server - Half-width system board. Half-height (1U) or full-height (2U)
depending on riser option selected.
HP offers four different drive cages for the 2U HP ProLiant e2000 G6 Chassis
8 LFF HDD Cage
12 LFF HDD Cage
NOTE:
NOTE: NOTE:
NOTE: Available for special large volume configurations only. Contact HP representative)
16 SFF HDD Cage
24 SFF HDD Cage
The 2U chassis can support two server node configurations:
Two full height nodes
Four half-height nodes
Server Node Blanks
Server Node BlanksServer Node Blanks
Server Node Blanks
If a server node is removed for a period, a blank must be installed to maintain the thermal environment
in the chassis. It is okay to leave a node in the chassis powered off to be serviced in the future. But once
a DL170e node is removed for servicing, a HP DL2000 Server Node Blank Kit is required. The blank is a
1U blank so two blanks are needed for a 2U node.
4 Node Configuration - Front View
4 Node Configuration - Front View4 Node Configuration - Front View
4 Node Configuration - Front View
NOTE:
NOTE:NOTE:
NOTE: For 2 node configurations, 2U nodes are ordered and are numbered 1 and 3. NOTE:
Additional nodes cannot be added later to 2 node configurations.
QuickSpecs
HP ProLiant DL2000 Multi Node Server
HP ProLiant DL2000 Multi Node ServerHP ProLiant DL2000 Multi Node Server
HP ProLiant DL2000 Multi Node Server
Standard Features
DA - 13847 North America — Version 10 — May 9, 2011 Page 8