QuickSpecs

DIMM Type -> Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs)Registered DIMMs (RDIMMs)
Registered DIMMs (RDIMMs)
Unbuffered with ECC
Unbuffered with ECCUnbuffered with ECC
Unbuffered with ECC
DIMMs (UDIMMs)
DIMMs (UDIMMs)DIMMs (UDIMMs)
DIMMs (UDIMMs)
DIMM Rank ->
Single
SingleSingle
Single
Rank
RankRank
Rank
(1R)
(1R)(1R)
(1R) Dual Rank (2R)
Dual Rank (2R)Dual Rank (2R)
Dual Rank (2R) Quad Rank (4R)
Quad Rank (4R)Quad Rank (4R)
Quad Rank (4R)
Single
SingleSingle
Single
Rank
RankRank
Rank
(1R)
(1R)(1R)
(1R) Dual Rank (2R)
Dual Rank (2R)Dual Rank (2R)
Dual Rank (2R)
DIMM Capacity -> 4GB 2GB 4GB 8GB 8GB 16GB 4GB 16GB 1GB 2GB 4GB
DIMM Native Speed (MHz) -> 1333 1333 1333 1066 1333 1333 1066 1066 1333 1333 1333
Voltage LV/Std Std Std Std LV/Std LV/Std Std Std Std Std LV/Std
SLOTS THAT CAN BE POPULATED
SLOTS THAT CAN BE POPULATEDSLOTS THAT CAN BE POPULATED
SLOTS THAT CAN BE POPULATED
16 slot servers 16 16 16 16 16 16 12 12 12 12 12
MAXIMUM MEMORY CAPACITY (GB)
MAXIMUM MEMORY CAPACITY (GB)MAXIMUM MEMORY CAPACITY (GB)
MAXIMUM MEMORY CAPACITY (GB)
16 slot servers 64 32 64 128 128 256 48 192 12 24 48
POPULATED DIMM SPEED (MHz)
POPULATED DIMM SPEED (MHz)POPULATED DIMM SPEED (MHz)
POPULATED DIMM SPEED (MHz)
1 DIMM Per Channel 1333 1333 1333 1066 1333 1333 1066 1066 1333 1333 1333
2 DIMMs Per Channel
1333 * 1333 * 1333 * 1066 1333 *
1066/
1333 **
800 800 1066 1066 1333 *
3 DIMMs Per Channel (on 2
channels)
800 800 800 800 800 800 *** N/A N/A N/A N/A N/A
*supported with ROM update via ROM Based Setup Utility (RBSU)
** 2DPC: LV runs at 1066, Std voltage runs at 1333
***3DPC: LV/Std voltage runs at 800
NOTES:
NOTES:NOTES:
NOTES:
PC3-10600 DIMMs have a maximum speed of 1333MHz. PC3-8500 DIMMs have a maximum speed of 1066MHz
Mixing DIMM speeds is allowed, but the system processor speed rules always override the DIMM capabilities
If you do mix DIMM speeds, the memory bus will default to the minimum clock rate of all DIMMs in the system - even if the
slower DIMM is on the other processor
If you install 1x 1066MHz DIMM in channel 1 and 1x 1333MHz DIMM in channel 2, the maximum speed will be 1066MHz If
you install 1x 1066MHz DIMM in channel 1 and 5x 1333MHz DIMMs with 1 DIMM Per Channel (DPC) in each of the other
channels, the maximum speed will be 1066MHz
If you install 3DPC in one channel (if applicable) and 1DPC in all other channels, you run at 800MHz
Maximum memory speed will also depend on the processor installed
References to the above MHz speeds are for the various speeds of DDR3 DIMMs; 1333 refers to DDR3-1333, etc.
DIMM slot and configuration diagrams
DIMM slot and configuration diagramsDIMM slot and configuration diagrams
DIMM slot and configuration diagrams
Basic memory slot & population diagram
Basic memory slot & population diagramBasic memory slot & population diagram
Basic memory slot & population diagram
Population order; start with "A" first, "B" second, "C" third, etc. DIMM 8 is DIMM furthest away from the CPU and DIMM 1 is
DIMM closest to CPU.
QuickSpecs
HP ProLiant DL2000 Multi Node Server
HP ProLiant DL2000 Multi Node ServerHP ProLiant DL2000 Multi Node Server
HP ProLiant DL2000 Multi Node Server
Memory
DA - 13847 North America — Version 10 — May 9, 2011 Page 32