QuickSpecs

ManualsBrandsCompaq ManualsComputer equipmentProLiant DL170e - G6 Server

HP 4GB (1x4GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9

Memory Kit

500672-B21

HP 4GB (1x4GB) Dual Rank x8 PC3L-10600 (DDR3-1333) Unbuffered CAS-9 Low

Power Memory Kit

619488-B21

NOTE:

NOTE:NOTE:

NOTE:

All DDR3 memory option kits consist of one DIMM per kit. For detailed

memory configuration rules and guidelines, please use the Online DDR3 Memory

Configuration Tool:

www.hp.com/go/ddr3memory-configurator

NOTE:

NOTE:NOTE:

NOTE:

Kits described as LV include Low Power DIMMs. For more information on

ProLiant Energy Efficient Features, see:

www.hp.com/go/proliant-energy-efficient

NOTE:

NOTE:NOTE:

NOTE:

PC3L is a low voltage memory.

NOTE:

NOTE:NOTE:

NOTE:

There is a maximum support limitation of 8 ranks per memory channel

(maximum of 2 quad rank DIMMs per channel)

NOTE:

NOTE:NOTE:

NOTE:

Memory Min and Max depends on number of processors and type of memory:

Processor -> R-Dimm: Min 1 // Max 8 U-Dimm: Min 1 // Max 6

Processors -> R-Dimm: Min 2 // Max 16 U-Dimm: Min 2 // Max 12

HP I/O Expansion

HP I/O ExpansionHP I/O Expansion

HP I/O Expansion

Options

OptionsOptions

Options

Full-height (Only required if PN: 609096-B21 is selected in Step 1A above)

Full-height (Only required if PN: 609096-B21 is selected in Step 1A above)Full-height (Only required if PN: 609096-B21 is selected in Step 1A above)

Full-height (Only required if PN: 609096-B21 is selected in Step 1A above)

HP DL170h I/O Riser PCIe x16 x4 x4 FIO

514005-B21

HP DL170h I/O Riser PCIe x8 x8 x8 FIO

503587-B21

HP DL170h I/O Riser PCIe x16 x8 FIO

NOTE:

NOTE:NOTE:

NOTE:

The 2 slot riser (P/N: 512481-B21) is the only riser option that supports the

NVIDIA graphics cards.

512481-B21

Step 3: Choose Additional Factory Integratable Options (only one of the following from each

Step 3: Choose Additional Factory Integratable Options (only one of the following from eachStep 3: Choose Additional Factory Integratable Options (only one of the following from each

Step 3: Choose Additional Factory Integratable Options (only one of the following from each

list unless otherwise noted)

list unless otherwise noted)list unless otherwise noted)

list unless otherwise noted)

HP Storage Controllers

HP Storage ControllersHP Storage Controllers

HP Storage Controllers

NOTE:

NOTE:NOTE:

NOTE:

Non-Hot-Plug SATA Models: The embedded HP Smart Array B110i SATA

RAID supports RAID 0,1,10 and cold-plug capability with hot-plug form factor drives.

Non-hot-plug form factor hard disk drives are not supported in the DL2000.

NOTE:

NOTE:NOTE:

NOTE:

Hot-Plug SATA Models: A HP Smart Array B110i SATA RAID Hot-Plug

Advanced Pack per server or virtual machine is required for hot-plug SATA using the

embedded B110i SATA RAID controller.

NOTE:

NOTE:NOTE:

NOTE:

Supported controllers vary by configuration. See table below for supported

controllers. For a complete list of HP Storage controllers, please see the Additional

Options section of this QuickSpecs. Only FIO options are mentioned here.

QuickSpecs

HP ProLiant DL2000 Multi Node Server

HP ProLiant DL2000 Multi Node ServerHP ProLiant DL2000 Multi Node Server

HP ProLiant DL2000 Multi Node Server

Configuration Information - Factory Integrated Models

DA - 13847 North America — Version 10 — May 9, 2011

Page 20