Specifications

Removal and replacement procedures 92
Figure 81 Removing the System Board
To reinstall the system board:
1. Align the system board I/O connectors to their openings and slide the system board into place.
The screw holes on the tray should align with the system board.
2. Fasten the screws that secure the system board to the chassis.
Figure 82 Reinstalling the System Board
Power supply unit (PSU)
Located on the rear panel of the server power supply is a standard 500 W non-hot-plug PSU, or
optional 750 W or optional 460 W hot-plug PSU with PFC (power factor correction) function.