User`s guide

3 Basic Procedures
3-26
Running a Real-Time Application
You run your real-time application to observe the behavior of your model in
real time with the generated code.
The process of connecting consists of
• Establishing a connection between your Simulink model and the kernel to
allow exchange of commands, parameters, and logged data.
• Running the application in real time.
After you build the real-time application, you can run your model in real time.
This procedure uses the Simulink model
rtwin_model.mdl as an example, and
assumes you have created a real-time application for that model:
1 From the Simulation menu, click External, then from the Simulation
menu click
Connect To Target. Also, you can connect to the target from the
toolbar by clicking .
MATLAB displays the message
Model rtwin_model loaded