User`s guide

Real-Time Application
3-17
Although not visible in the Real-Time Workshop pane, the external target
interface MEX file
rtwinext is also configured after you click OK. This
allows external mode to pass new parameters to the real-time application
and to return signal data from the real-time application. The data is
displayed in Scope blocks or saved with signal logging.
Your
Real-Time Workshop pane will look similar to the figure shown below.
Do not select the
Inline parameters check box on the Optimization node.
Inlining parameters is used for custom targets when you want to reduce the
amount of RAM or ROM with embedded systems. Also, if you select inlining
parameters, the parameter tuning feature is disabled. Since PCs have more
memory than embedded systems, we recommend that you do not inline
parameters.
4 Do one of the following:
- Click
Apply to apply the changes to your model and leave the dialog box
open.
- Click
OK to apply the changes to your model and close the Configuration
Parameters
dialog box.