User`s guide

English
57
Resetting the printer to factory default
settings
Resetting the printer to the factory default settings clears all the settings from the
printer memory for your network. This should only be done as a last resort when
troubleshooting the printer.
Resetting the printer to the factory default settings may require you to reinstall the
printer software. Additionally, you will also have to reconfigure the printer security
settings.
The printer default settings are:
Follow these steps to reset the printer to the factory default settings:
1. Verify that the printer is powered on.
2. Press and hold down the Report Page button.
3. While holding down the Report Page button, press the Cancel button three times.
4. Release the Report Page button.
Option Default setting
Communication mode Ad hoc
Network name (SSID) hpsetup
Encryption None
IP address Automatic
Wireless radio On
EWS administrator password [blank]
Marlin_NG.book Page 57 Friday, June 18, 2004 2:54 PM