User`s guide

English

Changing wireless security settings

If you change the wireless security settings for your wireless network, you must

reconfigure the printer with the new settings.

Getting started

Before reconfiguring the printer, you must find the following settings:

• Network name (SSID)

• The new wireless security settings:

• WEP: Find the WEP key(s)

• WPA: Find the passphrase and authentication protocol

Consult the configuration utility for the network Wireless Access Point (WAP) to find

the wireless security settings.

Configuring the printer

Follow these steps to reconfigure the printer with new wireless security settings:

1. Use an Ethernet cable to connect the printer to an Ethernet port on the network,

such as an available Ethernet port on a Wireless Access Point (WAP), router, hub,

or wall socket.

2. Open the printer embedded Web server (EWS). For help opening the EWS, see

page 50.

3. On the EWS, click the Networking tab.

4. Under the Connections heading, click Wireless (802.11).

5. On the Wireless Setup tab, click the Start Wizard button.

6. Follow the onscreen instructions to enter the new settings and finish the

configuration.

Marlin_NG.book Page 51 Friday, June 18, 2004 2:54 PM