User`s guide

English

Network settings are wrong or have changed

If any of the settings displayed on the HP Report page do not match the network

settings, or if the network wireless security settings have changed, follow these steps:

1. Connect the Ethernet cable to the printer Ethernet port, and then do one of the

following tasks:

• For an ad hoc network: connect the Ethernet cable to your computer.

• For an infrastructure network: connect the Ethernet cable to the Wireless

Access Point or router.

2. Open the printer embedded Web server (EWS). For help opening the EWS, see

page 50.

3. On the EWS, click the Networking tab.

4. Under the Connections heading click Wireless (802.11).

5. On the Wireless Setup tab, click the Start Wizard button.

6. After the wireless setup wizard has finished, close the EWS, and then disconnect

the Ethernet cable.

wireless_trouble.fm Page 33 Monday, June 21, 2004 2:33 PM