User`s guide

30
English
• Verify that the computer is connected to the network
Verify that the computer is connected to the network and the computer LAN or
network card is operating correctly.
The computer cannot find the printer after you remove the
network cable
Check the Wireless Status light on the front of the printer. If the Wireless Status light is
not illuminated, then the printer wireless radio is not active.
Verify that the network cable has been removed from the printer. The printer cannot
communicate over a wireless connection if the network cable is connected to the
printer Ethernet port.
Check the Network light
Check the Network light on the front of the printer. If the Network light is not
illuminated, then the printer is not connected to the network.
Marlin_NG.book Page 30 Friday, June 18, 2004 2:54 PM