User`s guide

English

11. Insert the printer software CD in the computer CD-ROM drive, and then double-

click the CD desktop icon.

12. Double-click the HP Deskjet 6800 installer icon, and then restart the computer

when prompted.

13. Open Chooser, and then select the HP Inkjet 6.x icon.

14. When asked if you want the computer to scan for TCP/IP network printers, click

Yes.

15. Select the printer, and then close Chooser.

Additional computers

You must install the printer software on each computer that will use the printer. Follow

steps 11 through 15 above to install the printer software on other network computers.

802.11g

The printer defaults to 802.11b in ad hoc mode in order to be compatible with the

widest assortment of 802.11 devices. If your network is made up of only 802.11g

devices, then you might want to configure the printer to operate in 802.11g mode in

order to optimize network performance.

To configure the printer to operate in 802.11g mode while connected to an ad hoc

network, follow the steps under “802.11g” on page 13.

Marlin_NG.book Page 26 Friday, June 18, 2004 2:54 PM