User`s guide

English

8. On the Wireless (802.11) Interface screen, click the Start Wizard button to start the

Wireless Configuration Wizard.

9. Follow the onscreen instructions to configure the printer settings, including the

WEP key you wrote down in step 1.

10. After the Wireless Configuration Wizard is finished, close the EWS.

11. Unplug the Ethernet cable from the printer to enable wireless communication.

12. Insert the printer software CD in the computer CD-ROM drive, and then double-

click the CD desktop icon.

13. Double-click the HP Deskjet 6800 installer icon, and then restart the computer

when prompted.

14. Open Chooser, and then select the HP Inkjet 6.x icon.

15. When asked if you want the computer to scan for TCP/IP network printers, click

Yes.

16. Select the printer, and then close Chooser.

Additional computers

You must install the printer software on each computer that will use the printer. Follow

steps 12 through 16 above to install the printer software on other network computers.

Marlin_NG.book Page 24 Friday, June 18, 2004 2:54 PM