User`s guide

English

Infrastructure network with encryption

1. Open the AirPort Admin Utility, then do the following:

a. Click Base Station, and then select Equivalent Network Password.

b. Write down the WEP key on a piece of paper.

c. Close the AirPort Admin Utility.

2. Use an Ethernet cable to connect the printer to an Ethernet port on the network,

such as an available Ethernet port on a Wireless Access Point (WAP), router, hub,

or wall socket.

3. Verify that the Network light is illuminated. If not, check the cable connections.

4. Press the printer Report Page button to print an HP Report page.

5. Launch the computer Internet browser, and then enter the printer URL listed on the

HP Report page in the address box to open the printer embedded Web server

(EWS).

6. On the EWS, click the Networking tab.

7. Under the Connections heading, click Wireless (802.11).

Go to the next page...

Marlin_NG.book Page 23 Friday, June 18, 2004 2:54 PM