User`s guide

English

Mac OS 9

Infrastructure network without encryption

1. Use an Ethernet cable to connect the printer to an Ethernet port on the network,

such as an available Ethernet port on a Wireless Access Point (WAP), router, hub,

or wall socket.

2. Verify that the Network light is illuminated. If not, check the cable connections.

3. Press the printer Report Page button to print an HP Report page.

4. Launch the computer Internet browser, and then enter the printer URL listed on the

HP Report page in the address box to open the printer embedded Web server

(EWS).

5. On the EWS, click the Networking tab.

6. Under the Connections heading, click Wireless (802.11).

7. On the Wireless (802.11) Interface screen, click the Start Wizard button to start the

Wireless Configuration Wizard.

Go to the next page...

Marlin_NG.book Page 21 Friday, June 18, 2004 2:54 PM