User`s guide

English
19
15. Do one of the following depending on the version of Mac OS X you are using:
16. Select the printer, and then click the Add button.
17. Close Print Center.
Additional computers
Follow these steps to install the printer software on each computer that will use the
printer.
1. Insert the printer software CD in the computer CD-ROM drive, and then double-
click the CD desktop icon.
2. Double-click the HP Deskjet 6800 installer icon, and then follow the onscreen
instructions.
3. Close the HP Deskjet 6800 series printer Setup Assistant when it appears.
Since the printer is already configured for the network, you do not need to use the
setup assistant.
4. Open Print Center, and then follow steps 13 through 17 above.
Mac OS X v 10.2.3 and later
Select Rendezvous.
Mac OS X v 10.2.2 and earlier
Select HP IP Printing, then click the
Discover button.
Marlin_NG.book Page 19 Friday, June 18, 2004 2:54 PM