Product manual

settings. These values can be obtained from TCS if
utilizing the TCS provided ISP. You must also enter the
ISP username, ISP password and ISP Phone Number.
These values will be given to you by TCS if utilizing the
TCS provided ISP.
In this section you also enable or disable Secure
Sockets Layer (SSL) communication with the central
server. SSL provides greater security of data being
passed from the QD2040 to the centrally hosted
Ubiquity server. You can also select when you want the
QD2040 to communicate with the server by selecting
Always On, Never On or Specifying the times. To
specify the times, select a cycle time from the drop
down menu and then select how long you want the unit
to remain online from another drop down menu.
Ethernet to Central Server
If Ethernet to Central Server mode is selected, select
whether DHCP or static IP addressing is used. If
static IP addressing is selected, you must also enter
the Gateway, Subnet and DNS protocol settings. You
will be required to confirm these settings when
submitting the page. Select whether to enable or
disable Secure Sockets Layer (SSL) communication
with the central server.
In this section also enter the SMTP Server settings, POP
username and password and a return email address.
You can also select when you want the QD2040 to
communicate with the server by selecting Always On,
Never On or Specifying the times. To specify the times,
select a cycle time from the drop down menu and then
select how long you want the unit to remain online from
another drop down menu.
Stand-alone / Dial-In
Before you can setup the QD2040 to operate in the
Stand-alone / Dial-In mode, you must first uncheck the
default setting of 'Setup DHCP Server' option. When in
Stand-alone / Dial-In mode, the QD2040 functions as a
self contained server to the controller network. Disable
or enable dial-in access to the QD2040 from the drop
down menu. If enabling dial-in function, you must also
enter the dial-in username and password along with a
password confirmation. When in Stand-alone / Dial-In
mode the QD2040 can be accessed via a remote PC
using Windows Dial-Up networking, or can be accessed
over an ethernet.
R
2800 LAURA LANE • MIDDLETON, WI 53562 • [phone] • FAX [phone] • www.tcsbasys.com
6