Hardware and Software Guide HP Notebook Series Document Part Number: 366536-001 November 2004 This guide explains how to identify, access, and use most of the hardware and software features available on your notebook. Modem and wireless device information is not included in this guide. For wireless device information, refer to the printed Go Wireless booklet included with your notebook (select models only) and to the wireless device guides on the Notebook Documentation CD.
© Copyright 2004 Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks of Microsoft Corporation. Intel is a trademark or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. SD Logo is a trademark of its proprietor. Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard Company under license. The information contained herein is subject to change without notice.
Contents 1 Hardware Top Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–2 Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–3 Power Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–4 Lights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1–5 Buttons. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents 2 Keyboard TouchPad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–2 Identifying TouchPad Components . . . . . . . . . . . . . . 2–2 Using the TouchPad. . . . . . . . . . . . . . . . . . . . . . . . . . 2–3 Setting TouchPad Preferences . . . . . . . . . . . . . . . . . . 2–3 Hotkeys and Shortcut Keys . . . . . . . . . . . . . . . . . . . . . . . 2–3 Identifying fn and Function Keys . . . . . . . . . . . . . . . 2–4 Hotkey and Shortcut Key Quick Reference . . . . . . .
Contents Using Battery Power . . . . . . . . . . . . . . . . . . . . . . . . . . . Identifying the Power Lights . . . . . . . . . . . . . . . . . . Switching Between Battery and External Power. . . Charging a Battery Pack . . . . . . . . . . . . . . . . . . . . . Monitoring the Charge in a Battery Pack . . . . . . . . Managing Low-Battery Conditions . . . . . . . . . . . . . Resolving Low-Battery Conditions . . . . . . . . . . . . . Calibrating a Battery Pack. . . . . . . . . . . . . . . . . . . .
Contents 5 Security Security Feature Recommendations. . . . . . . . . . . . . . . . . 5–1 Security Feature Quick Reference . . . . . . . . . . . . . . . . . 5–2 Antivirus Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–3 Critical Security Updates for Windows XP . . . . . . . . . . . 5–4 Firewall Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–5 QuickLock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5–6 Passwords. . . . . . . . . . .
Contents Using an ExpressCard . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–9 Configuring an ExpressCard . . . . . . . . . . . . . . . . . . 6–10 Inserting an ExpressCard. . . . . . . . . . . . . . . . . . . . . 6–10 Removing an ExpressCard . . . . . . . . . . . . . . . . . . . 6–12 Using Digital Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6–13 Using the Digital Media Light. . . . . . . . . . . . . . . . . 6–14 Inserting Digital Memory Cards . . . . . . . . . . . . . . .
Contents 8 Communications Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting the Modem . . . . . . . . . . . . . . . . . . . . . . . Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connecting a Network Cable. . . . . . . . . . . . . . . . . . . Turning a Network Connection Off and On . . . . . . . Accessing the Network at Startup . . . . . . . . . . . . . . . Wireless Function (Select Models Only) . . . . . . . . . . . . . 802.
Contents A Specifications Notebook Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . A–1 Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . A–2 Rated Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A–3 Expansion Port Input/Output Signals. . . . . . . . . . . . . . . . A–3 Finding More Environmental Information. . . . . . . . . . . .
1 Hardware This chapter identifies the visible hardware features of your notebook. To find out how to use a feature, such as hotkeys, or to find out about a general topic, such as Standby or Hibernation, refer to the other chapters in this guide.
Hardware Top Components TouchPad Component Description 1 TouchPad button Enables/disables the TouchPad. 2 TouchPad* Moves the pointer and selects or activates items on the screen. 3 Left and right TouchPad buttons (2)* Function like the left and right buttons on an external mouse. 4 TouchPad scroll zone* Scrolls up or down. 5 TouchPad light On: TouchPad is enabled. *This table describes default settings.
Hardware Keys Component Description 1 Function keys Perform system and application tasks. When combined with the fn key, the function keys perform additional tasks as hotkeys. For more information, refer to “Hotkey and Shortcut Key Quick Reference” in Chapter 2. 2 fn key Combines with other keys to perform system tasks and activates hotkeys. For example, pressing fn+f8 increases screen brightness. 3 Windows® logo key Displays the Windows Start menu.
Hardware Power Control Component Description Power/standby button* When the notebook is ■ Off, press to turn on the notebook. ■ On, briefly press to initiate Hibernation. ■ In Standby, briefly press to resume from Standby. ■ In Hibernation, briefly press to restore from Hibernation. the system has stopped responding and ✎ IfMicrosoft® Windows® shutdown procedures cannot be used, press and hold the power/standby button for at least 4 seconds to turn off the notebook.
Hardware Lights Component Description 1 Wireless light On: An integrated wireless device has been enabled (select models only). 2 Caps lock light On: caps lock is on. 3 Num lock light On: num lock or the numeric keypad is on.
Hardware Buttons 1–6 Component Description 1 Volume down button Decreases system volume. 2 Volume mute button Mutes or restores system volume. 3 Volume up button Increases system volume. 4 Quick Launch buttons Launch default multimedia, digital imaging or music applications (varies by model). To reassign another application to a Quick Launch button, refer to “Using Custom Assignments and Schemes” in Chapter 2.
Hardware Front Components Component Description 1 Display release latch Opens the notebook. 2 Stereo speakers (2) Produce stereo sound. 3 Power/standby light On: Notebook is turned on. Blinking: Notebook is in Standby. 4 Battery light On: Battery pack is charging. Blinking: Battery pack has reached a low-battery condition. 5 AC power light On: Notebook is receiving AC power. 6 Hard drive activity light On: Internal hard drive is being accessed.
Hardware Rear Components Connectors, Jacks and Ports 1–8 Component Description 1 Security cable slot Attaches an optional security cable to the notebook. 2 Power connector Connects an AC adapter. 3 USB port Connects optional 1.1- or 2.0-compliant USB devices. 4 S-Video-out jack Connects an optional S-Video device, such as a television, VCR, camcorder, projector, or video capture card. 5 External monitor port Connects an optional VGA external monitor or projector.
Hardware Vent Component Description Exhaust vent Provides airflow to cool internal components. Ä Hardware and Software Guide To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as a pillow, blanket, rug, or thick clothing, to block airflow.
Hardware Left-Side Components Connectors, Jacks and Components Component Description 1 USB port Connects an optional 1.1- or 2.0-compliant USB device. 2 Audio-in (microphone) jack Connects an optional monaural microphone. 3 Audio-out (headphone) jack Connects optional headphones or powered stereo speakers. Also connects the audio function of an audio/video device such as a television or VCR. 4 Optical drive* Supports an optical disc. 5 Optical drive release button Opens the optical drive.
Hardware Vent Component Description Exhaust vent Provides airflow to cool internal components. Ä Hardware and Software Guide To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as a pillow, blanket, rug, or thick clothing, to block airflow.
Hardware Right-Side Components Component Description 1 Digital Media Slot Supports the following optional digital memory cards: SD (Secure Digital) Memory Card, SDIO Card, Memory Stick, Memory Stick Pro, MultiMediaCard, xD Picture Card, and SmartMedia. 2 PC Card eject button Ejects an optional PC Card from the PC Card slot. 3 PC Card slot Supports an optional Type I or Type II 32-bit (CardBus) or 16-bit PC Card. 4 ExpressCard slot Supports an optional ExpressCard.
Hardware Component Description 6 Digital drive eject button Ejects an optional HP USB Digital Drive from the digital drive bay. 7 USB ports (2) Connect optional 1.1- or 2.0-compliant USB devices. 8 1394 port Connects an optional 1394 device, such as a camcorder. 9 RJ-11 (modem) jack Connects a modem cable. (Modem cable included with select models.) - RJ-45 (network) jack Connects a network cable. (Network cable not included.
Hardware Bottom Components Bays and Memory Compartment Component Description 1 Memory compartment Contains 2 memory slots. Depending on the model, when the notebook is shipped, either one or both memory slots are filled with a replaceable memory module. 2 Battery pack release latch Releases a battery pack from the battery bay. 3 Battery bay Holds a battery pack. 4 Hard drive bay Holds the internal hard drive.
Hardware Vents Component Description Vents (6) Provide airflow to cool internal components. Ä To prevent overheating, do not obstruct vents. Do not allow a hard surface, such as a printer, or a soft surface, such as a pillow, blanket, rug, or thick clothing, to block airflow. Additional Standard Components The components included with the notebook vary by region, country, notebook model, and the optional hardware ordered.
Hardware Cables and Cord Component Description 1 Connects the modem to a modem jack or to a country-specific modem adapter. Modem cable* (included with select models) modem cable has a 6-pin ✎ ARJ-11 telephone connector at each end. 2 Power cord* Connects the AC adapter to an AC outlet. 3 Network cable (not included) Connects the notebook to a network jack. network cable has an 8-pin ✎ ARJ-45 network connector at each end. *Power cord and modem cables vary in appearance by region and country.
Hardware Adapters and Battery Pack (AC adapter appearance may vary) Component Description 1 AC adapter Converts AC power to DC power. 2 Country-specific modem adapter (included by region as required) Adapts the modem cable to a non-RJ-11 telephone jack. 3 Battery pack Provides power to the notebook when the notebook is not connected to external power.
Hardware Labels The labels affixed to the notebook and to some notebook components provide information you may need when troubleshooting system problems or traveling internationally with the notebook. 1–18 ■ The Microsoft® Certificate of Authenticity label contains the Product Key number. You may need this number to update or troubleshoot problems with the operating system. ■ The system label provides regulatory information about the notebook.
Hardware Restoration and Documentation Discs Discs for repairing or reinstalling software and for obtaining supplementary information about the notebook are included with the notebook. ■ For information about restoring, repairing, or reinstalling software, refer to Chapter 9, “Software Updates, Restorations and Utilities.
2 Keyboard This chapter provides information about the features of your notebook keyboard, including the TouchPad, hotkeys and shortcut keys, and Quick Launch buttons.
Keyboard TouchPad Identifying TouchPad Components Component Description 1 TouchPad button Enables/disables the TouchPad. 2 TouchPad* Moves the pointer and selects or activates items on the screen. 3 Left and right TouchPad buttons (2)* Function like the left and right buttons on an external mouse. 4 TouchPad scroll zone* Scrolls up or down. 5 TouchPad light On: TouchPad is enabled. *This table describes default settings.
Keyboard Using the TouchPad The TouchPad provides the navigation, selection, and scroll functions of an optional external mouse. ■ To move the pointer, slide your finger across the TouchPad surface in the direction you want to move the pointer. ■ To use the TouchPad like an external mouse, press the TouchPad buttons. The left and right TouchPad buttons have the same click functions as the left and right buttons of an external mouse.
Keyboard Identifying fn and Function Keys The icons on the function keys f1 through f12 represent the hotkey functions available on the notebook.
Keyboard Hotkey and Shortcut Key Quick Reference The following table identifies the default hotkey and shortcut key functions. information about changing the function of the fn+f5 ✎ For hotkey, refer to “Managing Power Options” in Chapter 3. Default Function Key Combination Display system information. fn+esc Open Help and Support window. fn+f1 Open print options window. fn+f2 Open Web browser. fn+f3 Switch display and external display. fn+f4 Initiate Standby. fn+f5 Initiate QuickLock.
Keyboard Hotkey and Shortcut Key Procedures To use a hotkey or shortcut key command on the notebook keyboard, use either of the following procedures: ■ Briefly press the fn key, and then briefly press the second key of the hotkey command. ■ Press and hold down the fn key, briefly press the second key of the hotkey command, and then release both keys at the same time.
Keyboard Open Help and Support Center Window (fn+f1) The fn+f1 hotkey opens the Help and Support Center. From the Help and Support Center, you can access general information about your notebook, links to software updates and online technical support specialists, and other support features. For more information about the Help and Support Center window, refer to the Help and Support Guide on the Notebook Documentation CD.
Keyboard The following 5 video transmission types, with examples of devices that use them, are supported by the fn+f4 hotkey: ■ LCD (notebook display) ■ External VGA (most external monitors) ■ S-Video (televisions, camcorders, VCRs, and video capture boards with S-Video-in connectors) ■ Composite video (televisions, camcorders, VCRs, and video capture boards with composite-video-in jacks) ■ Component video video and component video devices can be ✎ Composite connected to the notebook only through
Keyboard Initiate QuickLock (fn+f6) The fn+f6 hotkey initiates the operating system QuickLock security feature. QuickLock protects your notebook by displaying the operating system log-on screen. While the log-on screen is displayed, the notebook cannot be accessed until a Windows user password or Windows administrator password is entered. Before you can use the QuickLock feature, you must set a Windows user password or Windows administrator password.
Keyboard Stop an Audio CD or DVD (fn+f10) The fn+f10 hotkey stops the play of an audio CD or DVD. Play Previous Track of an Audio CD or DVD (fn+f11) The fn+f11 hotkey plays the previously played track of an audio CD or DVD that is playing. Play Next Track of an Audio CD or DVD (fn+f12) The fn+f12 hotkey plays the next track of an audio CD or DVD that is playing.
Keyboard Keypad The numeric keypad consists of 17 keys that can be used like the keys on an external keypad.
Keyboard Quick Launch Buttons Quick Launch buttons enable you to use one keystroke to access a software application or to activate a wireless network device (select models only). Component Description 1 Quick Launch buttons Launch default multimedia, digital imaging or music applications (varies by model). To reassign another application to a Quick Launch button, refer to “Using Custom Assignments and Schemes,” later in this chapter.
Keyboard Using Custom Assignments and Schemes A Quick Launch button can be reassigned to an Internet or network destination or to any software application or data file. For example, a Quick Launch button can be assigned to open ■ Your Internet browser to a favorite Web page. ■ An application, such as Microsoft Word. ■ A document, such as an Excel worksheet. Button assignments can be grouped into schemes. When you select a scheme, only the button assignments within that scheme are active.
3 Power Selecting a Power Source Å WARNING: This notebook is designed to run demanding applications at full power. As a result of increased power consumption, it is normal for the notebook to feel warm or hot when used continuously. To avoid potential discomfort or burns, do not block the air vents or use the notebook on your lap for extended periods.
Power 3–2 Task Recommended Power Source Work in most software applications. ■ Charged battery pack in the notebook ■ External power supplied through the following devices: ❐ AC adapter ❐ Optional HP notebook expansion product Charge or calibrate a battery pack in the notebook. External power supplied through: ■ AC adapter ■ Optional HP notebook expansion product Install or modify system software or write to a CD.
Power About Standby, Hibernation and Shutdown This section describes Standby, Hibernation, and shutdown and explains when to implement them. Standby and Hibernation are energy-saving features that can be initiated by you or by the system. Standby Standby reduces power to system components that are not in use. When Standby is initiated, your work is saved in random access memory (RAM) and the screen is cleared.
Power Hibernation Ä CAUTION: If the configuration of the notebook system is changed during Hibernation, it may not be possible to restore from Hibernation. When the notebook is in Hibernation: ■ Do not add or remove memory modules. ■ Do not insert or remove the internal hard drive. ■ Do not connect or disconnect external devices. ■ Do not insert or remove a CD or DVD.
Power Ä CAUTION: If Hibernation is disabled and the notebook reaches a critical low-battery condition, the system does not automatically save your system memory. » To verify that Hibernation is enabled, select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. Be sure that the Enable Hibernation check box is selected. is not displayed as a power option in the Power ✎ Hibernation Options window if it has been disabled.
Power Initiating Standby, Hibernation or Shutdown The following sections describe when to initiate Standby or Hibernation and when to shut down your notebook. When Leaving Your Work Initiate Standby for shorter times and Hibernation for longer times or for more power conservation. The amount of time a battery pack can support Standby or Hibernation or hold a charge varies by notebook configuration and the condition of the battery pack.
Power When Using Drive Media Ä CAUTION: Do not initiate Standby or Hibernation while using drive media. Doing so may result in video and audio degradation and loss of audio and video playback functionality. Standby and Hibernation interfere with the use of drive media. If Standby or Hibernation is accidentally initiated while drive media (such as a CD or DVD) is in use: ■ You may see the warning message “Putting the computer into Hibernation or Standby may stop the playback.
Power Identifying Power Controls and Indicators Standby, Hibernation, shutdown, and display procedures use the following controls and indicators: 1 Power/standby button 2 Initiate Standby hotkey (fn+f5) 3 Power/standby light 3–8 Hardware and Software Guide
Power Turning the Notebook or Display On or Off Task Procedure Results Turn on the notebook. Press the power/standby button. ■ The power/standby light is turned on. ■ The operating system is loaded. the ✎ Pressing power/standby button turns on the notebook from Standby, Hibernation, or shutdown. Shut down the notebook.* Save your work and close all open applications. Then: ■ Press the power/standby button, and then follow the on-screen instructions (if displayed) for shutting down the notebook.
Power Using Emergency Shutdown Procedures Ä CAUTION: Emergency shutdown procedures may result in the loss of unsaved data. If the notebook does not respond and you are unable to use the normal Windows shutdown procedure, try the following emergency shutdown procedures in the sequence provided: ■ Press ctrl+alt+delete. Select the Shut Down button, and then select Shut down from the list. ■ Press and hold down the power/standby button for at least 4 seconds.
Power Initiating or Resuming from Standby Task Procedure Result Initiate Standby With the notebook on, use either of the following procedures: ■ Press the fn+f5 hotkey. ■ Select Start > Turn off Computer > Stand by. ■ The power/standby light blinks. ■ The screen is cleared. Allow the system to initiate Standby ■ If the notebook is running on battery power, the system initiates Standby after 10 minutes of notebook inactivity (default setting).
Power Initiating or Restoring from Hibernation Task Procedure Result Initiate Hibernation With the notebook on, use either of the following procedures: ■ Briefly press the power/standby button. ■ Select Start > Shut Down > Hibernate. (If the Hibernate option is not displayed, press and hold shift.) ■ The power/standby light is turned off. ■ The screen is cleared. the notebook is in ✎ IfStandby, you must resume from Standby before you can initiate Hibernation.
Power Managing Power Options Many of the default power settings, such as timeouts and alarms, can be changed in the Power Options window. For example, you can set an audio alert to warn you when the battery reaches a low-power condition. By default, when the notebook is on ■ Briefly pressing the power/standby button initiates Hibernation. ■ Pressing the fn+f5 hotkey, called the “sleep button” in the operating system, initiates Standby. ■ The display switch turns off the display on select models only.
Power Displaying the Power Meter Icon The Power Meter icon changes shape to indicate whether the notebook is running on a battery pack or external power. Select the icon to display the Power Options window. To hide or show the Power Meter icon on the taskbar: 1. Select Start > Control Panel > Performance and Maintenance > Power Options > Advanced tab. 2. Select or clear the check box Always show icon on the taskbar. 3. Select OK.
Power Setting or Changing a Power Scheme The Power Schemes tab in the Power Options window assigns power levels to system components. You can assign different schemes depending on whether the notebook is running on a battery pack or external power. You can also set a power scheme that initiates Standby or turns off the display or hard drive after a time interval that you specify. To set a power scheme: 1. Select Start > Control Panel > Performance and Maintenance > Power Options > Power Schemes tab. 2.
Power Using Battery Power Identifying the Power Lights Battery pack procedures refer to the front panel lights shown below. Component Description 1 Power/standby light On: Notebook is turned on. Blinking: Notebook is in Standby. 2 Battery light On: The battery pack is charging. Blinking: The battery pack has reached a low-battery condition. 3 AC power light On: The notebook is receiving AC power.
Power Switching Between Battery and External Power The notebook switches between AC power and battery power according to the availability of an external AC power source, always preferring AC power. If the notebook contains a charged battery pack and is running on external AC power, the notebook will switch to battery power only if the AC adapter is disconnected from the notebook.
Power Monitoring the Charge in a Battery Pack Obtaining Accurate Charge Information To increase the accuracy of all battery charge displays: ■ Allow the battery pack to discharge fully before charging it. ■ Charge the battery pack fully. Even a new battery pack can display charge information inaccurately if it has not been fully charged. ■ Fully charging and discharging the battery pack will reduce the need for battery calibration.
Power Identifying Low-Battery Conditions This section explains how to identify low and critical battery conditions. Low-Battery Condition When a battery pack that is the sole power source for the notebook reaches a low-battery condition (5 percent of a full charge), the battery light blinks. Critical Low-Battery Condition If a low-battery condition is not resolved, the notebook enters a critical low-battery condition (3 percent of a full charge).
Power Resolving Low-Battery Conditions Ä CAUTION: If the notebook has reached a critical low-battery condition and has begun to initiate Hibernation, do not restore power until the power/standby light turns off. When External Power Is Available To resolve a low-battery condition when external power is available, connect the AC adapter.
Power Calibrating a Battery Pack When to Calibrate Even if a battery pack is heavily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a new battery pack before first use. Calibrate the battery pack under the following conditions: ■ When battery charge displays seem inaccurate. ■ When you observe a significant change in battery run time. ■ When the battery pack has been unused for one month or more.
Power Discharging the Battery Pack Hibernation is enabled by default but can be disabled. Before you begin the full discharge, disable Hibernation. To disable Hibernation: 1. Select Start > Control Panel > Performance and Maintenance > Power Options > Hibernate tab. 2. Clear the Enable Hibernation check box. 3. Click Apply. Ä CAUTION: If you plan to leave the notebook unattended during discharge, save your work before starting the discharge procedure. To fully discharge the battery pack: 1.
Power If you use the notebook occasionally during the discharge procedure and have set energy-saving timeouts, expect the following performance from your system during the discharge process: ■ The monitor will not turn off automatically. ■ Hard drive speed will not decrease automatically while the notebook is idle. ■ System-initiated Standby will not occur. Recharging the Battery Pack 1.
Power Storing a Battery Pack If the notebook will be unused and unplugged for more than 2 weeks, remove and store the battery pack. Ä CAUTION: To prevent damage to a battery pack, do not expose it to high temperatures for extended periods of time. High temperatures accelerate the self-discharge rate of a stored battery pack. To prolong the charge of a stored battery pack, keep it in a cool, dry place. Use the following table to estimate how long you can safely store a battery pack.
Power Battery Conservation Settings and Procedures Using the following battery conservation settings and procedures extends the run time of a battery pack: ■ Turn off wireless and local area network (LAN) connections and exit modem applications when you are not using them. ■ Do not leave your notebook connected to AC power for extended periods of time. ■ Disconnect from the notebook any external devices that use power from the notebook.
Power Replacing a Battery Pack Ä CAUTION: To prevent loss of work when removing a battery pack that is the only power source, initiate Hibernation or turn off the notebook before removing the battery pack. To replace the battery pack: 1. Turn the notebook upside down. ❏ To remove a battery pack, slide the battery pack release latch 1. (The battery pack tilts upward.) Then pull the battery pack out of the battery bay 2.
Power ❏ To insert a battery pack, insert the alignment tab on the battery pack into the alignment slot on the notebook, and then tilt the battery pack downward until it snaps into place. 2. To restore from Hibernation or to turn on the notebook, press the power/standby button. Disposing of a Used Battery Pack For information about recycling or disposing of a used battery pack, refer to the Regulatory and Safety Notices guide on the Notebook Documentation CD.
4 Multimedia Using the Speakers The internal speakers play sound in stereo from applications, the operating system, games, drive media, the Internet, and other sources. an external device such as a headset is connected to the ✎ Ifheadphone jack, the internal speakers are disabled.
Multimedia Using the Volume Controls Adjust volume with the volume buttons on the notebook. You can also adjust volume using the controls in your operating system and in some multimedia applications. The volume mute button on the notebook overrides all software volume settings. To adjust volume using the notebook volume buttons: ■ Press the volume down button 1 to decrease volume. ■ Press the volume mute button 2 to mute or restore volume.
Multimedia To access the operating system volume controls, select Start > Control Panel > Sounds, Speech, and Audio Devices > Sounds and Audio Devices, and then select the Volume tab. ■ To access additional sound quality settings, such as balance, select the Advanced button under Device volume. ■ To display a volume icon on your taskbar, select the check box for Place volume icon in the taskbar, and then select OK.
Multimedia Using the Microphone Jack When connecting a microphone to the microphone jack, use a monaural microphone with a 3.5-mm plug. A monaural electret condenser microphone is recommended. ■ If you connect a stereo microphone, left channel sound will record on both channels. ■ If you connect a dynamic microphone, the recommended microphone sensitivity may not be achieved.
Multimedia Connecting an S-Video Device Connecting the Audio The S-Video jack supports video signals only. If you are setting up a configuration that combines audio and video functions, such as playing a DVD movie on your notebook and displaying it on your television, you will need a standard 3.5-mm audio cable, available from most computer or electronics retailers. To connect the audio cable: 1. Plug the stereo end of the audio cable into the notebook headphone jack. 2.
Multimedia Connecting the Video To transmit video signals through the S-Video jack, you will need a standard S-Video cable, available from most computer or electronics retailers. To connect the S-Video cable: 1. Plug either end of the S-Video cable into the notebook S-Video jack. 2. Plug the other end of the cable into the S-Video input connector on the external device. 3. If the image is not displayed on your external device, restart the notebook.
Multimedia Displaying a Video Image To display an image on the notebook display or a video device display, both the notebook and the video device must be turned on. To switch the image between the notebook display and the video device display, press the fn+f4 hotkey. The fn+f4 hotkey toggles the image between the notebook display, the video device display, and both displays simultaneously.
Multimedia Changing the Color Television Format Color television formats are modes by which television video signals are sent and received. To send signals between the notebook and a television, both the notebook and the television must be using the same color television format. The NTSC format is common in the United States, Canada, Japan, and South Korea. The PAL format is common in Europe, China, Russia, and Africa, and the PAL-M format is common in Brazil.
Multimedia Using Multimedia Software Several multimedia applications to play, create, and manage digital media are included with your notebook. Most of the applications can be accessed from a desktop icon or from the Start > All Programs menu. Other applications may be provided on a disc.
Multimedia Selecting Multimedia Applications The multimedia software included with your notebook is determined by your region and notebook model. The following list describes the capabilities of some of the multimedia applications that may be included with your notebook. ■ Apple iTunes can be used to play audio CDs, copy music to or from CDs, listen to Internet radio stations, download music, and search for and organize music files.
Multimedia InterVideo WinDVD Player InterVideo WinDVD Player is an application that enables you to play DVD movies or video CDs. WinDVD Player is preinstalled on the notebook. DVDs contain third-party DVD player programs such as ✎ Some PCFriendly that may interfere with WinDVD. Reinstalling WinDVD Player If WinDVD Player has been uninstalled and you insert a DVD that contains a third-party player program, you are prompted to install that third-party player program.
Multimedia Playing a Video CD or DVD For best playback quality, save and close all files and software unrelated to playing the DVD or video CD. If a DVD displays a “Playback of content from this region is not permitted” error message, stop the DVD, change the region setting, and then restart the DVD. For information about changing the region setting, see the “Changing DVD Region Settings” section, later in this chapter. To play a DVD or video CD: 1. Insert the DVD or video CD into the optical drive. 2.
Multimedia Changing DVD Region Settings Most DVDs that contain copyrighted files also contain region codes. The region codes help protect copyrights internationally. You can play a DVD containing a region code only if the region code on the DVD matches the region setting on your DVD-ROM drive. If the region code on a DVD does not match the region setting on your drive, a “Playback of content from this region is not permitted” message is displayed when you insert the DVD.
Multimedia Creating CDs Your system comes with a data transfer utility that enables you to create or copy optical drive media. Before you can create CDs, you must install this application using the installation CD provided with your notebook. drive has DVD+RW capability, DVDs can be ✎ Ifusedyourwithoptical the CD creation utility to store large amounts of data on a disc. To build DVDs containing movies, see the “Creating DVDs Using InterVideo WinDVD Creator” section, later in this chapter.
Multimedia Choosing Recording Media It is recommended that you use high-quality media that correspond to the maximum speed of the optical drive. The notebook can write or copy to CDs which provide one-time, nonerasable recording (CD-R) or to CDs that provide erasable recording (CD-RW). to write data to a CD, you must use a blank CD-R disc ✎ Inor order a CD-RW disc on which the format has not been finalized.
Multimedia Creating DVDs Using InterVideo WinDVD Creator InterVideo WinDVD Creator allows you to create, author, and edit movies and burn them to a DVD. Before you can create DVDs, you must install this application using the installation CD, included with select notebooks. This application will not install successfully unless your notebook is equipped with an optical drive that has DVD+RW capability.
Multimedia Choosing Recording Media It is recommended that you use high-quality media that correspond to the maximum speed of the optical drive. The notebook can write or copy to DVDs that provide one-time, nonerasable recording (DVD+R) or to DVDs that provide erasable recording (DVD+RW). to write data to a DVD, you must use a blank DVD+R ✎ Indiscorder or a DVD+RW disc on which the format has not been finalized.
5 Security Security Feature Recommendations You can use the security features provided with your notebook to protect your notebook, personal information, and data from a variety of risks. In some environments, some security features may be unnecessary.
Security Security Feature Quick Reference To Protect Against Use This Security Feature Computer viruses Norton antivirus software Unauthorized access to information about you or your notebook ■ Windows updates ■ Firewall software ■ HP administrator Setup password, which protects the system information in the Setup utility* Unauthorized use of the notebook ■ QuickLock ■ Power-on password* Unauthorized access to the Setup utility HP administrator Setup password* Unauthorized access to the contents
Security Antivirus Software When you use the notebook for e-mail, network or Internet access, you expose the notebook to computer viruses. Computer viruses can disable your operating system, applications, or utilities or cause them to function abnormally. Antivirus software can detect most viruses, destroy them, and in most cases, repair damage they have caused. To provide protection against newly discovered viruses, antivirus software must be updated. Norton AntiVirus is preinstalled on your notebook.
Security Critical Security Updates for Windows XP A Critical Security Updates for Windows XP disc may have been included with your notebook to provide additional updates delivered after the computer was configured. Throughout the life of the computer, Microsoft will continue to update the operating system and make these updates available on their Web site. To update your system using the Critical Security Updates for Windows XP disc: 1. Insert the disc into the drive.
Security Firewall Software When you use the notebook for e-mail, network, or Internet access, it is possible for unauthorized persons to obtain information about you, your notebook, and your data. Firewalls monitor all incoming and outgoing traffic on your computer by including features such as logging and reporting, automatic alarms, and user interfaces for configuring the firewall. To protect your privacy, it is recommended that you use firewall software.
Security QuickLock The fn+f6 hotkey initiates the operating system QuickLock security feature. QuickLock protects your notebook by displaying the operating system log-on screen. While the log-on screen is displayed, the notebook cannot be accessed until a Windows user password or Windows administrator password is entered. Before you can use the QuickLock feature, you must set a Windows user password or Windows administrator password.
Security Passwords Recording Your Passwords Ä CAUTION: To prevent loss of access to items protected by passwords, record your passwords in a safe place away from your notebook. Passwords provide strong security. For example, if you set both a power-on password and an HP administrator Setup password and forget both passwords, you cannot start the notebook or resume from Hibernation until a service partner resets the notebook.
Security Coordinating HP and Windows Passwords Some password options are provided by your HP software and others are provided by your operating system. The following table summarizes the most commonly used HP passwords and Windows passwords. For information about additional Windows passwords, such as screen-saver passwords, refer to Start > Help and Support. Suggestions for coordinating HP and Windows passwords are provided after the following table.
Security You can use the same text for HP passwords and Windows passwords, with these considerations: ■ The text of HP passwords can be any combination of up to 8 letters and numbers and is not case sensitive. ■ An HP password must be set and entered with the same type of keys. For example, an HP password set with keyboard number keys will not be recognized if it is entered with keypad number keys. For information about the keypad, refer to “Keypad” in Chapter 2.
Security Power-On Password A power-on password prevents unauthorized use of the notebook. After it is set, the power-on password must be entered each time the notebook is started, restarted, or restored from Hibernation. A power-on password ■ Does not display as it is set, entered, changed, or deleted. ■ Must be set and entered with the same keys. For example, a power-on password set with keyboard number keys will not be recognized if you enter it with keypad number keys.
Security Changing a Power-On Password A power-on password is changed in the Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Power-On Password, and then press enter. 3. Type the current password in the Enter Current Password field, and then press enter. 4. Type the new password in the Enter New Password field, and then press enter. 5.
Security Deleting a Power-On Password A power-on password is deleted in the Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Power-On Password, and then press enter. 3. Type the current password in the Enter Current Password field, and then press enter 3 times.
Security HP Administrator Setup Password The HP administrator Setup password protects the configuration settings and system identification information in the Setup utility. For more information about the Setup utility, refer to “Using the Setup Utility” in Chapter 9. After an HP administrator Setup password is set, it must be entered to access the Setup utility. The HP administrator Setup password ■ Is not interchangeable with a Windows administrator password.
Security Setting an HP Administrator Setup Password An HP administrator Setup password is set in the Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Administrator Password, and then press enter. 3. Type the password in the Enter New Password field, and then press enter. 4. Type the password in the Confirm New Password field, and then press enter. 5.
Security Changing an HP Administrator Setup Password An HP administrator Setup password is changed in the Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Administrator Password, and then press enter. 3. Type the current password in the Enter Current Password field, and then press enter. 4.
Security Deleting an HP Administrator Setup Password An HP administrator Setup password is deleted in the Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > Administrator Password, and then press enter. 3. Type the current password in the Enter Current Password field, and then press enter 3 times.
Security Using DriveLock Ä CAUTION: If you forget the DriveLock password, the hard drive is permanently locked and can no longer be used. DriveLock prevents unauthorized access to the contents of a hard drive. After DriveLock protection is applied to a drive, a password must be entered to access the drive. Setting DriveLock Passwords To access the DriveLock settings in the Setup utility: 1. Open the Setup utility by turning on the notebook.
Security Entering DriveLock Passwords Each time you restart the notebook, you are prompted to enter the DriveLock password. To enter the DriveLock password: » Type the DriveLock password in the Enter DriveLock Password field, and then press enter. 3 incorrect attempts to enter the password, you must ✎ After restart the notebook and try again. Changing DriveLock Passwords To access the DriveLock settings in the Setup utility: 1. Open the Setup utility by turning on the notebook.
Security Deleting DriveLock Protection To access the DriveLock settings in Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2. Use the arrow keys to select Security > DriveLock Password, and then press enter. 3. Type the current password in the Enter Current Password field, and then press enter 3 times.
Security Device Disabling To allow limited use of your notebook, you can disable specific notebook capabilities. For example, you can disable the ability of the notebook to start from a CD, yet allow the use of all other notebook features. Notebook capabilities are disables or reenabled in the Setup utility: 1. Open the Setup utility by turning on the notebook. Press f10 while the Setup message is displayed in the lower-left corner of the screen. 2.
Security Security Cable To help protect your notebook, use a security cable (purchased separately). solutions are designed to act as deterrents. These ✎ Security solutions cannot prevent a product from being mishandled or stolen. To attach a security cable: 1. Loop the security cable around a stationary object (such as a desk). 2. Insert the security cable lock into the security cable slot.
Security 3. Turn the key counter-clockwise 1, remove the key 2, and keep it in a safe location. To remove the security cable, reverse the procedure above.
6 Hardware Options and Upgrades External Devices The jacks, ports, and connectors described in this guide support standard external devices. ■ For information about which jack, port, or connector to use, refer to the documentation included with the device. ■ For information about installing or loading any software, such as drivers, required by the device, refer to the documentation included with the device. To connect a standard external device to the notebook: 1.
Hardware Options and Upgrades Connecting a Monitor or Projector To connect an external monitor or projector to the notebook, connect the monitor cable to the external monitor port on the back of the notebook. a properly connected external monitor or projector does not ✎ Ifdisplay an image, try pressing the fn+f4 hotkey to switch the image to the monitor.
Hardware Options and Upgrades Using a USB Device To use a USB device, plug the device into one of the 4 USB ports on your notebook. Legacy USB 1.1 support is enabled by default. This supports a USB keyboard or hub connected to a USB port on the notebook during startup (before Windows loads) or in a non-Windows application or utility.
Hardware Options and Upgrades Connecting a 1394 Device IEEE 1394 is a hardware interface that can be used to connect a high-speed multimedia or data storage device to the notebook. Scanners, digital cameras, and digital camcorders often require a 1394 connection. You may need to load device-specific drivers and other software before using some 1394 devices. For information about device-specific software, refer to the device documentation or to the Web site of the device manufacturer or provider.
Hardware Options and Upgrades Using a PC Card A PC Card is a credit card–sized accessory designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). The notebook PC Card slot supports both 32-bit (CardBus) and 16-bit PC Cards. PC Cards can be used to add modem, sound, storage, wireless communication, or digital camera functions to the notebook. Selecting a PC Card A Type I or Type II PC Card can be used.
Hardware Options and Upgrades Inserting a PC Card Ä■ CAUTION: To prevent damage to the PC Card connectors: Use minimal force when inserting a PC Card into a PC Card slot. ■ Do not move or transport the notebook while a PC Card is inserted. 1. Press the PC Card eject button 1 to extend the button, and then press the button again to release the PC Card slot cover. 2. Remove the PC Card slot cover 2.
Hardware Options and Upgrades 3. Hold the PC Card label-side up with the connectors facing the notebook. 4. Gently slide the card into the slot until the card is seated.
Hardware Options and Upgrades Stopping and Removing a PC Card Ä CAUTION: To prevent loss of work or an unresponsive system, stop the PC Card before removing it. ✎ Stopping a PC Card, even if it is not in use, conserves power. 1. Close all applications and complete all activities that are supported by the PC Card. 2. To stop a PC Card, select the Safely Remove Hardware icon on the taskbar, and then select the PC Card.
Hardware Options and Upgrades Using an ExpressCard The ExpressCard is a next-generation PC Card with higher performance and scalability and is designed to conform to the standard specifications of the PCMCIA. To support a broad range of applications, ExpressCards come in 2 sizes: ExpressCard/34 and ExpressCard/54. The ExpressCard slot on your notebook supports either size.
Hardware Options and Upgrades Configuring an ExpressCard CAUTION: If you install all of the software or any of the enablers provided by an ExpressCard manufacturer, you may not be able to use other ExpressCards. If you are instructed by the documentation included with your ExpressCard to install device drivers: ■ Install only the device drivers for your operating system.
Hardware Options and Upgrades 3. Hold the ExpressCard label-side up with the connectors facing the notebook. 4. Gently slide the card into the slot until the card is seated.
Hardware Options and Upgrades Removing an ExpressCard Ä CAUTION: To prevent loss of work or an unresponsive system, stop the ExpressCard before removing it. an ExpressCard, even if it is not in use, ✎ Stopping conserves power. 1. Close all applications and complete all activities that are supported by the ExpressCard. 2. To stop an ExpressCard, select the Safely Remove Hardware icon on the taskbar, and then select the ExpressCard.
Hardware Options and Upgrades Using Digital Media The Digital Media Slot supports the following digital media formats: ■ Secure Digital (SD) ■ Secure Digital Input/Output (SDIO) ■ MultimediaCard (MMC) ■ Memory Stick (MS) ■ Memory Stick Pro (MSP) ■ SmartMedia (SM) ■ xD Picture Card (XD) Digital media formats consist of flash memory cards that provide secure data storage and convenient data sharing.
Hardware Options and Upgrades Using the Digital Media Light The digital media light is turned on when an inserted digital memory card is being accessed. The digital media light is turned off when inserted digital media is inactive or when the Digital Media Slot is empty.
Hardware Options and Upgrades Inserting Digital Memory Cards Ä■ CAUTION: To prevent damage to the digital memory card connectors: Use minimal force when inserting a digital memory card into a Digital Media Slot. ■ Do not move or transport the notebook while digital memory cards are inserted. 1. Hold the card label-side up with the connectors facing the notebook. 2. Gently slide the card into the Digital Media Slot until the card is seated. (The card will extend slightly beyond the edge of the notebook.
Hardware Options and Upgrades Removing Digital Memory Cards To remove a digital memory card: 1. Complete all activities that are supported by the card (such as a data transfer) and close all applications. 2. To stop a digital memory card, select the Safely Remove Hardware icon on the taskbar, and then select the digital memory card. (To display the Safely Remove Hardware icon on the taskbar, click the arrow icon for Show Hidden Icons.) 3. Pull the card out of the slot.
Hardware Options and Upgrades Disabling or Restarting Digital Memory Cards An inserted digital memory card uses power even when the card is not in use. Disabling the card conserves power. To disable an inserted digital memory card, select the My Computer icon on the Windows Desktop, right-click the drive assigned to the card, and then select Eject. (The card is stopped but is not released from the Digital Media Slot.) To restart the card, remove and then reinsert it.
Hardware Options and Upgrades Displaying Memory Information When RAM is increased, the operating system increases the hard drive space reserved for the hibernation file. If you experience problems with Hibernation after increasing RAM, verify that your hard drive has enough free space for the larger hibernation file. 6–18 ■ To display the amount of RAM in the system, select Start > Control Panel > Performance and Maintenance > System > General tab.
Hardware Options and Upgrades Removing or Inserting a Memory Module Å WARNING: To prevent exposure to electrical shock, access only the memory compartment during this procedure. The memory compartment and the battery and hard drive bays are the only user-accessible internal compartments on the notebook. All other areas that require a tool to access should be opened only by a service partner.
Hardware Options and Upgrades 5. Remove the battery pack, if inserted. For instructions, refer to “Replacing a Battery Pack” in Chapter 3. 6. Remove the memory compartment screw 1. 7. Lift and remove the memory compartment cover 2.
Hardware Options and Upgrades 8. Remove or insert the memory module. To remove a memory module: a. Pull away the retention clips on each side of the module 1. (The module tilts upward.) b. Grasp the edges of the module and gently pull the module out of the memory slot 2. c. To protect a memory module after removal, place it in an electrostatic-safe container.
Hardware Options and Upgrades To insert a memory module: a. Align the keyed (notched) edge of the module with the keyed area in the memory slot 1. b. With the module at a 45-degree angle from the surface of the memory compartment, press the module into the memory slot until it is seated 2. c. Push the module down until the retention clips snap into place 3.
Hardware Options and Upgrades 9. Align and lower the memory compartment cover onto the notebook 1. 10. Reinsert and tighten the memory compartment screw 2. 11. Replace the battery pack if you removed a battery pack at the beginning of this procedure, reconnect external power, and then restart the notebook.
7 Drives About Drives Drives enable you to store and access data. Hard drives and optical drives vary by model. ■ Hard drives are for the storage of data files and of software such as system files, applications, and drivers. A hard drive is sometimes called a hard disk drive. For more information, see the “Hard Drive” section, later in this chapter. ■ Optical drives, such as a DVD-ROM drive, support DVDs and/or CDs.
Drives All models have a digital drive bay that can be used with an optional HP USB Digital Drive. For more information, see the “Optional HP USB Digital Drive (Select Models Only)” section, later in this chapter. An optional external drive can be added to the system by connecting it to one of the USB (Universal Serial Bus) or 1394 ports on the notebook.
Drives Caring for Drives Drives are fragile notebook components that must be handled with care. The following cautions apply to all drives. Additional cautions are included with the procedures to which they apply. Ä■ CAUTION: To prevent loss or damage to the notebook or a drive: Handle a drive carefully. Do not drop it. ■ When inserting a drive, use only enough pressure to seat the drive. Excessive force can damage drive connectors.
Drives Hard Drive This section discusses the primary hard drive of the notebook. Identifying the Hard Drive Activity Light The hard drive activity light is turned on when the internal hard drive is being accessed.
Drives Replacing the Internal Hard Drive The hard drive in the hard drive bay is the internal hard drive. Remove the internal hard drive only for repair or replacement. Ä CAUTION: To prevent an unresponsive system and loss of work, do not begin this procedure until you have ■ Saved your work, closed all open applications, and shut down the notebook. ■ Disconnected the notebook from external power and removed the battery pack. 1. Save your work and close all open applications. 2.
Drives 7. Remove the 4 hard drive retaining screws from the hard drive bay 1. 8. Remove the hard drive cover 2.
Drives 9. Using the handle, unseat the hard drive by sliding the hard drive towards the edge of the notebook 1, and then remove it from the hard drive bay 2.
Drives 10. To install a hard drive, lower the hard drive into the hard drive bay 1, and then slide the hard drive away from the notebook edge until it is fully seated 2.
Drives 11. Lower the hard drive cover onto the hard drive bay 1. 12. If you have installed a hard drive, reinsert the 4 hard drive retaining screws 2. (If you removed but did not replace a hard drive, put the retaining screws in a safe place.
Drives Optical Drive Ä CAUTION: To avoid playback distortion or damage to optical media, stop the CD or DVD and exit media software before inserting or removing an optical drive. Inserting an Optical Disc 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media tray, and then pull the tray outward until it is fully extended 2. 3. Position a CD or one-sided DVD over the tray, label side up. 4.
Drives Removing an Optical Disc (With Power) 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media tray, and then pull the tray outward until it is fully extended 2. 3. Remove the disc from the tray by gently pushing down on the spindle while pulling up on the outer edges of the disc 3. Handle the disc by the edges, not the flat surfaces. (If the media tray is not fully extended, tilt the disc as you remove it.) 4. Close the media tray. 5.
Drives Removing an Optical Disc (Without Power) If the notebook is turned off or if no power is available, the release button on the optical drive will not work. To remove a disc from an optical drive without using the release button: 1. Insert a small object like the end of a paper clip into the release access 1 in the front bezel of the drive. 2. Press gently on the paper clip until the media tray is released, and then pull the tray out until it is fully extended 2. 3.
Drives Playing an Optical Disc You can play a CD or a DVD in your optical drive. The information in this section applies to most optical drives and most disc software. For information about specific disc software, including Windows Media Player, WinDVD, and the CD creation utility included with your notebook, refer to “Using Multimedia Software,” in Chapter 4.
Drives Protecting Playback Ä CAUTION: Inserting or removing any device while running any multimedia application may pause or stop the play. Ä CAUTION: Do not initiate Standby or Hibernation while using drive media. Doing so may result in video and audio degradation and loss of audio and video playback functionality. If Standby or Hibernation is accidentally initiated during playback: ■ You may see the warning message “Putting the computer into Hibernation or Standby may stop the playback.
Drives Boot Order By default, the notebook starts up from the internal hard drive. You can set the notebook to start up from any bootable CD or DVD in the optical drive. A bootable CD or DVD contains files needed by the notebook to start up and operate properly. You can also boot from a diskette drive or flash device connected to a USB port on your notebook. Set startup preferences in the Setup utility. The Setup utility is not a Windows utility and does not support the TouchPad.
Drives Installing an Optional SD Memory Card To install an optional SD Memory Card into the optional HP USB Digital Drive: 1. Remove the cap from the digital drive.
Drives 2. Insert the SD Memory Card into the SD slot of the digital drive.
Drives Inserting an Optional Digital Drive into the Digital Drive Bay To insert the optional digital drive into the digital drive bay: 1. Ensure that you have installed an SD Memory Card into the digital drive. 2. Gently insert the digital drive, label side up, into the digital drive bay.
Drives Removing an Optional Digital Drive from the Digital Drive Bay To remove the optional digital drive from the digital drive bay: 1. Press the digital drive release button to extend the button, and then press the button again to eject the digital drive 1. 2. Remove the digital drive from the digital drive bay 2.
Drives Connecting a Digital Drive to a USB Port The optional digital drive can be connected to the USB port on your notebook with the USB cable either retracted or extended. To connect the digital drive to the USB port with the cable retracted: 1. Ensure that you have installed an SD Memory Card into the digital drive. 2. Insert the USB connector on the digital drive into the USB port on your notebook.
Drives To connect the digital drive with the USB cable extended: 1. Rotate the USB cable until it is fully extended. 2. Insert the USB connector on the digital drive into the USB port on your notebook.
8 Communications Modem Ä CAUTION: Your built-in modem may not work with multiple phone lines or a private branch exchange (PBX), cannot be connected to a coin-operated telephone, and does not work with party lines. Some of these connections may result in excess electrical voltage and could cause a malfunction in the internal modem. Check your telephone line type prior to connecting your phone line. All notebook models include an RJ-11 (modem) jack and a preinstalled high-speed 56K modem.
Communications Connecting the Modem A modem must be connected to an analog telephone line. Å WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a telephone cable into the RJ-45 (network) jack. Å WARNING: Connecting the notebook to a digital line can permanently damage the modem. Immediately disconnect your modem cable if accidentally connected to a digital line.
Communications Connecting a Network Cable For information on connecting a network cable (not included), refer to the Modem and Networking guide on the Notebook Documentation CD. Turning a Network Connection Off and On To conserve power, turn off a network connection you are not using. ■ To turn off a network connection, log off the network, and then disconnect the network cable. ■ To turn on a network connection, connect the network cable, and then log on to the network.
Communications Wireless Function (Select Models Only) If your notebook is equipped with an integrated wireless device such as 802.11 or Bluetooth® wireless technology, you have a wireless notebook. Refer to the following sections for more information on 802.11 and Bluetooth wireless technology. The internal wireless antenna on your notebook is shown in the following illustration. Å 8–4 WARNING: Exposure to Radio Frequency Radiation.
Communications 802.11 Wireless Technology An 802.11 wireless notebook can connect to wireless networks (which also may be referred to as wireless LANs, WLANs, or hotspots) in your home, and in corporate offices, public universities, restaurants, and airports. With the 802.11 wireless function, you can access a network composed of other computers and accessories that are linked by a wireless router or a wireless access point.
Communications Turning On the Wireless Function To turn on the wireless function: 1. If your wireless notebook is off, turn it on. 2. Press the wireless button. (The wireless light is turned on.) 3. Right-click the Wireless Assistant icon (select models only) in the notification area (lower-right corner of the screen), and then select the Open Wireless Assistant window. Select the appropriate settings to toggle on/off the integrated 802.11 and Bluetooth devices.
Communications Using Wireless Security Features When you set up your own wireless network or access an existing wireless network, always ensure that security features are protecting the wireless network. Refer to the HP Web site at http://www.hp.com/go/wireless for details. WLAN Software WLAN software is provided with all notebooks that feature an integrated WLAN device. To install WLAN software, you need to know the name of the integrated WLAN device.
Communications Accessing WLAN Software WLAN software for Windows XP is available as a SoftPaq on the HP Web site. To access, download, and install the SoftPaq, use either of the following procedures: ■ Select Start > Help and Support, select a link, and then follow the instructions on the screen. ■ Visit the HP Web site at http://www.hp.com/support. Follow the instructions on the screen to identify your notebook and access the SoftPaq. WLAN software is provided in the Network category.
9 Software Updates, Restorations and Utilities Software Updates For optimal notebook performance and to make sure your notebook remains compatible with changing technologies, install the latest versions of the software provided with your notebook as they become available. You may find that the easiest way to update the software provided with your notebook is to use the software update links provided at Start > Help and Support.
Software Updates, Restorations and Utilities Preparing for Software Updates If your notebook connects to a network, consult with your network administrator before installing any software updates, particularly a ROM update. It is also recommended that you set a restore point before beginning a software update. For instructions, see the “Setting a System Restore Point” section, later in this chapter. To prepare for any software update, you need to identify your notebook type, series or family, and model.
Software Updates, Restorations and Utilities Accessing Notebook ROM Information To determine whether an available ROM update is a later ROM version than the ROM version currently installed on the notebook, you need to know the version of the currently installed ROM. » To view the ROM version of your notebook, press fn+esc. viewing system information, the system BIOS date is the ✎ When version number of the system ROM. The BIOS date may display in a decimal format, such as 10/19/2003 F.07.
Software Updates, Restorations and Utilities Downloading and Installing an Update Most software at the HP Web site is packaged in a compressed file called a SoftPaq. Some ROM updates may be packaged in a compressed file called a RomPaq. Most download packages contain a file named Readme.txt. Readme.txt contains detailed descriptive, installation, and troubleshooting information about the download. Readme.txt included with RomPaqs are English only.
Software Updates, Restorations and Utilities Downloading a ROM Update 1. Access the page at the HP Web site that provides software for your notebook: ❏ Select Start > Help and Support, and then select a software update link. - or ❏ Visit the HP Web site at http://www.hp.com/support. 2. Follow the instructions on the screen to identify your notebook and access the ROM update you want to download. 3. At the download area: a.
Software Updates, Restorations and Utilities Installing a ROM Update ROM installation procedures vary. Follow any instructions that are displayed on the screen after the download is complete. If no instructions are displayed: 1. Open Windows Explorer. To open Windows Explorer from the Start menu, select Start > All Programs > Accessories > Windows Explorer. 2. In the left pane of the Windows Explorer window, select My Computer, and then your hard drive designation.
Software Updates, Restorations and Utilities 3. At the download area: a. Write down the date, name, or other identifier of the SoftPaq you plan to download. (You will need to locate the update later, after it has been downloaded to the hard drive.) b. Follow the online instructions to download the SoftPaq to the hard drive. 4. When the download is complete, open Windows Explorer. To open Windows Explorer from the Start menu, select Start > All Programs > Accessories > Windows Explorer. 5.
Software Updates, Restorations and Utilities System Restore The System Restore utility enables you to safeguard your system files and functional configurations by using System Restore points. System Restore points are restorable “snapshots” or benchmarks of your system. The notebook may set System Restore points whenever you change personal settings or add software or hardware. Manually setting System Restore points provides additional protection for your system files and settings.
Software Updates, Restorations and Utilities Repairing or Reinstalling the Operating System The Operating System disc included with your notebook can be used to repair or reinstall the operating system. Either operations may take 1 to 2 hours to complete. ■ Repairing the operating system preserves your data and settings. ■ Reinstalling the operating system deletes all files on the notebook. After the operating system has been reinstalled, all device drivers must also be reinstalled.
Software Updates, Restorations and Utilities Repairing the Operating System To repair the operating system without deleting your personal data, use the Operating System disc that was shipped with the notebook: 1. Connect the notebook to external power and turn on the notebook. 2. Immediately insert the Operating System disc (included with the notebook) into the optical drive. 3. Press and hold the power/standby button for 5 seconds to turn off the notebook. 4.
Software Updates, Restorations and Utilities Reinstalling the Operating System If the System Recovery and operating system repair procedures did not restore functionality to your notebook, it may be necessary to reinstall the operating system. Ä CAUTION: Personal data and any software you have installed on the notebook will be lost during the operating system reinstall. To protect your data, back up your data before beginning the procedure.
Software Updates, Restorations and Utilities 9. Press enter to set up the operating system. 10. Press C to continue setup using this partition. 11. Select Format the partition using the NTFS file system (Quick), and press enter. Ä Formatting a drive will delete all current files. 12. Press F to format the drive and follow the on-screen instructions. The reinstallation process begins. This process may take up to 2 hours to complete. The notebook restarts in Windows after the process is complete. 13.
Software Updates, Restorations and Utilities Installing a Retail Version of an Operating System Ä CAUTION: Replacing an operating system enhanced for your HP notebook with a retail version of an operating system will result in the loss of all enhancements. In some cases, the loss of these enhancements may result in an unresponsive system or the loss of complete USB support. The Windows operating system provided on the notebook or on a restoration disc is enhanced for your HP notebook.
Software Updates, Restorations and Utilities Navigating and Selecting in the Setup Utility Because the Setup utility is not based on Windows, it does not support the TouchPad. Navigation and selection are by keystroke. ■ To navigate, use the up and down arrow keys or tab. ■ To select an item, use the arrow keys to select the item, and then press enter. ■ To close a display but remain in the Setup utility, press esc.
A Specifications The information in this appendix may be helpful if you plan to use or transport the notebook internationally or in extreme environments. Notebook Dimensions Dimension Metric U.S. Height (front) 4.51 cm 1.78 in Height (rear) 4.97 cm 1.96 in Width 39.79 cm 15.70 in Depth (with hinge) 28.81 cm 11.
Specifications Operating Environment Factor Metric U.S.
Specifications Rated Input Power The notebook operates on DC power, which can be supplied by an AC or a DC power source. Although the notebook can be powered from a stand-alone DC power source, it is strongly recommended that the notebook be powered only with a supported AC adapter. The notebook is capable of accepting DC power within the following specifications. Input Power Rating Operating voltage 19.0 V dc @ 7.1 A/9.5 A – 135 W/180 W* Operating current 7.1 A/9.
Specifications The following table identifies the input and output signals supported by the expansion port 2 on your notebook. ✎ Not all expansion products will support these features. Feature Support USB 2.
Specifications Finding More Environmental Information The specifications in this appendix contain information about exposing the notebook to environmental extremes. ■ For similar information about storing battery packs, refer to “Storing a Battery Pack” in Chapter 3. ■ For information about exposing the notebook to sunlight, ultraviolet light, x-rays, or magnetic fields, refer to the Maintenance, Shipping and Travel guide on the Notebook Documentation CD.
Index 1394 connector 1–13 1394 devices 6–4, 7–2 1394 port expansion product support A–4 identifying 1–13 using 6–4, 7–2 A AC adapter identifying 1–17 when to use 3–1 AC power light 1–7, 3–16 AC power. See power adapter, country-specific modem 1–17 administrator password 5–8 administrator Setup password 5–8 airport security devices 7–3 altitude specifications A–2 antivirus software 5–3 Apple iTunes 4–10 Application and Driver Recovery disc 9–12 applications.
Index storing 3–24 when to remove 3–5 battery pack release latch identifying 1–14 using 3–26 battery power conserving 3–25 when to use 3–6 BIOS (basic input/output system 9–2 See also ROM boot order 7–15 buttons digital drive eject 1–13 mute 1–6, 4–2 optical drive release 1–10 PC Card eject 1–12, 6–8 power/standby 1–4 Quick Launch 1–6, 2–12 TouchPad 1–2, 2–2 volume 1–6, 4–2 wireless 1–6, 2–12 See also keys; latches C cables audio 4–5 modem 1–13, 1–16, 8–1 network 1–13, 1–16, 8–3 S-Video 4–6 USB digital dr
Index D device disabling 5–20 digital drive installing SD Memory Card 7–16 removing 7–19 using 7–15 digital drive bay identifying 1–12 inserting digital drive 7–18 removing digital drive 7–19 digital drive cable digital drive eject button 1–13 digital media light 6–14 Digital Media Slot, identifying 1–12 digital memory cards disabling 6–17 inserting 6–15 Memory Stick (MS) 6–13 Memory Stick Pro (MSP) 6–13 MultiMediaCard (MMC) 6–13 removing 6–16 restarting 6–17 Secure Digital (SD) Memory Card 6–13 Secure Dig
Index DVD-ROM drive.
Index hard drive retaining screws 7–6, 7–9 hard drive, internal displaying free space 6–18 overview 7–1, 7–4 replacing 7–5 space required for Hibernation file 6–18 hardware components, displaying information 2–6 hardware features 1–1 headphone jack connecting 4–4 identifying 1–10, 4–3 headphones 4–3, 4–4 height, notebook A–1 Help and Support Center additional information 2–7 hotkey 2–7 Help and Support Guide 1–19 help, customer 1–19, 2–7 Hibernation avoiding when playing media 7–14 changing configuration d
Index InterVideo WinDVD Player error message 4–12 managing region settings 4–13 overview 4–10 reinstalling 4–11 using 4–11 J jacks audio-in (microphone) 1–10, 4–3, 4–4 audio-out (headphone) 1–10, 4–4 RJ-11 (modem) 1–13 RJ-45 (network) 1–13 S-Video-out 1–8, 4–6 K keypad 1–3, 2–11 keys fn 1–3, 2–4 function 1–3, 2–4 hotkeys 2–3, 2–4, 2–5, 2–6 keypad 1–3, 2–11 shortcut 2–3, 2–5, 2–6 Windows applications 1–3 Windows logo 1–3 See also buttons; function keys; latches L labels Microsoft Certificate of Authentic
Index removing, without power 7–12 See also CDs; discs; DVDs media tray 7–10, 7–11 memory displaying amount of 6–18 increasing 6–17 Memory Card, SD 7–16 memory compartment closing 6–23 identifying 1–14 opening 6–20 memory modules removing or inserting 6–19 supported 6–17 microphone jack connecting 4–4 identifying 1–10, 4–3 using 4–4 microphones 4–4 Microsoft Certificate of Authenticity label 1–18, 9–11 model number 9–2 modem approvals label 1–18 connecting 8–2 RJ-11 (modem) jack 1–13 specifications 8–1 mod
Index Product Key number 1–18 reinstalling 9–9, 9–11 repairing 9–9 shutting down 3–9, 3–10 Operating System disc 9–10, 9–11 optical discs.
Index power source selecting 3–1 switching 3–17 power/standby button changing function 3–13 identifying 1–4, 3–8 power/standby light 1–7, 3–3, 3–8, 3–16 power-on password 5–8, 5–10 Preboot eXecution Environment (PXE) 8–3 print options window hotkey 2–7 product identification label 1–18 Product Key number 1–18 projector connecting 1–8 switching display 2–7 PXE (Preboot eXecution Environment) 8–3 Q Quick Launch buttons identifying 1–6, 2–12 programming 2–13 QuickLock hotkey 2–9, 5–6 R radio frequency expos
Index security cable, connecting 5–21 security features 5–1, 5–2 security password 3–15 serial number 1–18, 9–2 series, notebook 9–2 service partner, contacting 5–7 Setup utility 9–13 shortcut key command 2–5, 2–6 shortcut keys overview 2–3 procedures 2–6 quick reference 2–5 shutdown procedures 3–9 shutdown. See turning off the notebook 3–5 signals supported A–4 sleep button 2–8, 3–13 sleep.
Index Standby avoiding when playing media 7–14 controls and indicators 3–8 drive media use 3–7 hotkey 2–8, 3–8 initiating 3–6, 3–11 overview 3–3 power/standby light 1–7 resuming from 1–4, 3–11 setting preferences 3–13 support, user 1–19, 2–7 S-Video cable 4–6 S-Video devices connecting 4–5 displaying image 4–7 transmission types 2–8 S-Video-out jack connecting video 4–6 identifying 1–8 switching display 2–7 system backup 9–8 system information 2–6 system label 1–18 system lockup 3–10 System Restore point r
Index U UDF prompt 4–15 unresponsive system, emergency shutdown procedures 3–10 USB devices connecting 6–2 using 6–3 USB digital drive cable USB ports connecting USB digital drive 7–20 identifying 1–8, 1–10, 1–13 USB support 6–3 user passwords 5–8 utilities, preloaded. See software V VCR audio-out jack, function 4–3 connecting 4–5 vents bottom 1–15 left side 1–11 rear 1–9 video CDs, DVDs.
