Technical data

SRI QIO
configuring to use, 3–11
Starting TCP/IP Services
after configuration, 3–16
automatically, 3–21
by command, 3–20
manually, 3–21
using TCPIP$CONFIG, 3–16
Stopping TCP/IP Services
automatically, 3–21
by command, 3–20
manually, 3–21
using TCPIP$CONFIG, 3–15
System parameters
checking and changing before installing, 1–4 to
1–5
setting the SPTREQ parameter, 1–5
T
Tasks
major, installing and configuring, 1–1
TCP/IP Services
and Anonymous FTP access, 3–12
client components
configuring, 3–8 to 3–10
starting and stopping individually, 3–21
configuration, 3–1 to 3–20
new, A–2
configuration files
converting from previous configuration,
3–2
core environment
configuring, 3–5 to 3–8
installation, 2–1 to 2–4
new, A–1
preparing to configure, 1–6
preparing to install, 1–1 to 1–6
server components
configuring, 3–10 to 3–11
starting and stopping individually, 3–21
starting after configuration, 3–15
starting and stopping automatically, 3–21
starting and stopping manually, 3–21
starting using TCPIP$CONFIG, 3–16
stopping using TCPIP$CONFIG, 3–15
upgrading, 2–1 to 2–4
verifying, 3–17
TCPIP$CONFIG menus
description, 3–4
TCPIP$CONFIG procedure
See Configuring TCP/IP Services
TELNET client
configuring, 3–8
TELNET server
configuring, 3–10
TFTP server
configuring, 3–10
Time zone
configuring, 3–7
Troubleshooting
configuration procedure problems, 3–19
U
UIC codes
assigning, 1–5
Upgrading TCP/IP Services, 2–1 to 2–4
User access
configuring to allow Anonymous FTP access,
3–11
V
Verifying the SNMP configuration, 3–19
Verifying the TCP/IP Services configuration, 3–17
X
XDM server
and DECwindows requirements, 3–11
configuring, 3–11
Index–3