Technical data

Sample New TCP/IP Services Installation and Configuration
A.1 Sample New Installation Procedure
Portion done: 100%
The following product has been installed:
DEC VAXVMS TCPIP V5.3-xx Layered Product
DEC VAXVMS TCPIP T5.3-xx: Compaq TCP/IP Services for OpenVMS.
Check the release notes for current status of the product.
A.2 Sample New Configuration Procedure
The following example shows a sample configuration dialog for the TCP/IP
Services, in which the following components are configured:
• Core environment
• TELNET client
• FTP server
In this example, the configuration takes place on a system where the product has
never been configured. If TCP/IP Services had been configured previously on the
system, the dialog would differ significantly (see Chapter 3).
TCP/IP Network Configuration Procedure
This procedure helps you define the parameters required
to run Compaq TCP/IP Services for OpenVMS on this system.
Checking TCP/IP Services for OpenVMS configuration database files.
Creating SYS$COMMON:[SYSEXE]TCPIP$SERVICE.DAT
Creating SYS$COMMON:[SYSEXE]TCPIP$HOST.DAT
Creating SYS$COMMON:[SYSEXE]TCPIP$NETWORK.DAT
Creating SYS$COMMON:[SYSEXE]TCPIP$ROUTE.DAT
Creating SYS$COMMON:[SYSEXE]TCPIP$PROXY.DAT
Creating SYS$COMMON:[SYSEXE]TCPIP$CONFIGURATION.DAT
Creating TCPIP$ETC:SYSCONFIGTAB.DAT
Compaq TCP/IP Services for OpenVMS requires a definition for at
least one interface. There are no interfaces defined on this
system.
Please select the Interface option from the Core Environment Menu.
Compaq TCP/IP Services for OpenVMS Configuration Menu
Configuration options:
1 - Core environment
2 - Client components
3 - Server components
4 - Optional components
5 - Shutdown Compaq TCP/IP Services for OpenVMS
6 - Startup Compaq TCP/IP Services for OpenVMS
7 - Run tests
A - Configure options 1 - 4
[E] - Exit configuration procedure
Enter configuration option: 1
Return
Compaq TCP/IP Services for OpenVMS Core Environment Configuration Menu
Configuration options:
A–2 Sample New TCP/IP Services Installation and Configuration