Technical data

Configuring TCP/IP Services
3.3 Running TCPIP$CONFIG
• Initialize Kerberos authentication for the TELNET server.
To display the Optional Components Configuration menu, choose option 4
(Optional components) from the Main Configuration menu. If you chose option
A from the Main Configuration menu to configure all the TCP/IP Services
components, the Optional Components Configuration menu displays automatically
after you finish configuring the server components.
The Optional Components Configuration menu displays the following menu
options:
Compaq TCP/IP Services for OpenVMS Optional Components Configuration
Menu
Configuration options:
1 - Configure PWIP Driver (for DECnet-Plus and PATHWORKS)
2 - Configure SRI QIO Interface (INET Driver)
3 - Set up Anonymous FTP Account and Directories
4 - Configure Kerberos Applications
A - Configure options 1 - 3
[E] - Exit menu
Enter configuration option:
Choose the options that are appropriate for your system: the PWIP Driver,
the SRI QIO Interface, Anonymous FTP Accounts and Directories, or Kerberos
authentication for TELNET.
• If you want to run PATHWORKS for OpenVMS (Advanced Server), Advanced
Server for OpenVMS, or DECnet over TCP/IP, configure the PWIP driver by
choosing option 1. In addition, refer to the appropriate documentation for the
layered product.
• If you run or develop applications that use the SRI QIO API, choose option 2.
• If you want to allow Anonymous FTP access, choose option 3 to set up an
Anonymous FTP account and directories. Make sure you obtain the necessary
user information code (UIC) (see Section 1.2.8) and determine guest user
privileges.
• If you want to provide the security benefits of Kerberos authentication for
the TELNET server, choose option 4 to configure Kerberos. For details about
configuring Kerberos support, see Section 3.3.7.1.
The following example shows the output for configuring the PWIP driver:
Enter configuration option: 1
Return
TCPIP Transport for DECnet and Pathworks Service Configuration
Service is enabled on specific node.
Service is stopped.
TCPIP Transport for DECnet and Pathworks Service configuration options:
1 - Disable service on this node
[E] - Exit PWIP_DRIVER configuration
Enter configuration option:
3–12 Configuring TCP/IP Services