Technical data
Configuring TCP/IP Services
3.3 Running TCPIP$CONFIG
The following sample output shows the start of the TCPIP$CONFIG procedure
and a portion of the conversion of a previous configuration:
TCP/IP Network Configuration Procedure
This procedure helps you define the parameters required
to run Compaq TCP/IP Services for OpenVMS on this system.
NOTE:
TCP/IP has been previously configured from an earlier version
of this product. You can avoid a complete reconfiguration of
TCP/IP by allowing this procedure to automatically convert the
old configuration files. If you choose not to do this now, you
will not be asked again. At the end of the conversion you will
be able to further modify your configuration.
Convert the old configuration files [Y]:
Return
Preparing files for conversion...
UCX$SERVICE.DAT --> TCPIP$SERVICE.DAT
UCX$HOST.DAT --> TCPIP$HOST.DAT
UCX$NETWORK.DAT --> TCPIP$NETWORK.DAT
UCX$ROUTE.DAT --> TCPIP$ROUTE.DAT
UCX$PROXY.DAT --> TCPIP$PROXY.DAT
UCX$CONFIGURATION.DAT --> TCPIP$CONFIGURATION.DAT
UCX$EXPORT.DAT --> TCPIP$EXPORT.DAT
UCX$PRINTCAP.DAT --> TCPIP$PRINTCAP.DAT
No new database files were created.
FTP SERVER Configuration
LPD SERVER Configuration
Service is not defined in the SYSUAF.
Nonprivileged user access is not enabled.
By default, Compaq TCP/IP Services for OpenVMS configures
LPD such that nonprivileged users cannot modify queue entries.
Creating TCPIP$AUX identifier with a value of 3655
Compaq TCP/IP Services for OpenVMS supports Line Printer Daemon
Protocol (see RFC 1179).
LPD requires the following:
- Name of the local queue
- Name of the remote queue
- Name of the remote host
- Spooling directory for the local queue
To add or delete printers in the TCPIP PRINTCAP database, use the
$RUN SYS$SYSTEM:TCPIP$LPRSETUP command.
.
.
.
3.3.2 Creating New TCP/IP Services Configuration Files
If you do not have an existing TCP/IP Services configuration in place from a
previous version of the product, the procedure begins by creating configuration
database files, as shown in the following sample output:
TCP/IP Network Configuration Procedure
This procedure helps you define the parameters required
to run Compaq TCP/IP Services for OpenVMS on this system.
Checking TCP/IP Services for OpenVMS configuration database files.
Configuring TCP/IP Services 3–3