Technical data

Preparing to Install and Configure TCP/IP Services
1.2 Preinstallation Tasks
$ RUN SYS$SYSTEM:AUTHORIZE
UAF> SHOW /BRIEF [your-group-number,*]
UAF> SHOW /IDENTIFIER /VALUE=UIC:[your-group-number,*]
To force TCPIP$CONFIG to allow you to specify a new UIC group number,
assign the value TRUE to the logical name TCPIP$ASK_GROUP_UIC, as in
the following example. When you configure TCP/IP Services, TCPIP$CONFIG
prompts you for the group UIC.
$ DEFINE TCPIP$ASK_GROUP_UIC TRUE
1.3 Assembling Configuration Information
Use the worksheet in Table 1–3 to assemble configuration information.
If you are configuring TCP/IP Services on the system for the first time, the
TCPIP$CONFIG procedure prompts you for the information listed in Table 1–3.
If you are reconfiguring after a product upgrade, the procedure uses the previous
configuration information as the default for the new configuration.
For information to help you answer the questions on the configuration worksheet,
see appropriate chapters in the Compaq TCP/IP Services for OpenVMS
Management guide.
1–6 Preparing to Install and Configure TCP/IP Services