User manual

4 56-3124-15 Edition AF 2003-08
Installation of new templates
The 16-bit unpacking programme used during installation of new templates cannot open
folders with long names or names which contain symbols.
Action: Change any folder names on drive c: where necessary before beginning
installation.
MethodQueue
If you choose to start a MethodQueue at a certain time point (Start at:) and the methods
are to be run at different dates, the methods to be run at the later date will not be run at
all.
Action: No action possible.
MethodQueue system conflict
The following problem may occur when running multiple systems from one PC. If a
MethodQueue is started on one system (system 1) it will Stop (Indication: Restart button
in the System Control window is activated) if one of the following events occurs on
another system (system 2) controlled from the same PC:
• Disconnection of system 2
• System 2 is switched off
• A MethodQueue is started on system 2, then Cancel is pressed during start protocol
• A method run is started on system 2 but subsequently aborts (e.g. because of a result
name conflict)
Action: No action possible.
Pressure conversion in System Control
If you use a pressure unit different from the one that the strategy is using by default, the
conversion between MPa, bar and psi does not work.
Action: Use the default strategy unit.
Connection to systems
The OPC Data Access server included in UNICORN will always connect to the first
system defined in the UNICORN system table.
Action: No action possible.