User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-19
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Writer:
Chris Seiter
Project:
Compaq Netelligent 2724/2824 Dual-Speed Hub User Guide
Comments:
ile Name:
2824_5.DOC
Last Saved On:
06/25/97 5:32 PM
Parameters Stored in NVRAM
The 2824 hub stores important configuration parameters in non-volatile
memory to allow its configuration to be saved if a power outage occurs. When
the hub is powered up, it restores the saved settings.
■
System name, location, and contact
■
Novell Hub MIB repeater and port names
■
RMON configuration (doesn’t include history buckets or event log)
■
VT100 configuration, including password
■
Port enable/disable
■
Backplane isolated/connected
■
Backup port configuration
■
Port Intrusion configuration, including security
■
Internal 2-port 10/100 switch configuration
■
IP and SLIP configuration
■
IP autodiscovery configuration
■
IPX configuration
■
IPX autodiscovery configuration
■
BOOTP configuration
■
IP and IPX trap receivers
■
Authentication trap enable/disable
■
RFC1516/Novell repeater MIB traps selection
■
RMON table configuration timeout
■
Modem configuration
■
SNMP/IP access control, including community strings
■
SNMP/IPX access control, including community strings
■
Telnet enable/disable