User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . .
1-2 Introduction
Writer: Chris Seiter Project: Introduction Comments: 185813-002/707085-001
File Name:MIC100_1.DOC Last Saved On:3/14/96 10:38 AM
Kit Contents
Before you start to install the repeater, verify that this package contains the
following items:
■ 1108 100Base-TX Repeater (Part No. 267022-001)
■ Shielded AC power cord
■ Compaq Netelligent 1108 100Base-TX Repeater User Guide
Hub Components
This section provides an overview of the repeater's components including the
LED indicators, RJ-45 ports, and uplink switch. Figure 1-1 shows the repeater
front panel and back panel.
Power/Segmentation/
Activity LED Indicators
RJ-45 Ports and LEDs
UPLINK Switch
(for converting
Port 8 to
uplinkable port)
PWR
MDIMDI-X
ACT
COL
UPLINK
12 34 5 6 78
XXXXXXX
Figure 1-1. Repeater Front Panel
Power Cord Connector
Figure 1-2. Repeater Back Panel