User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
G-4
Writer: Chris Seiter Project: Glossary Comments: 185813-002/707085-001
File Name:MIC100_G.DOC Last Saved On:3/13/96 11:18 AM
Local Area Network (LAN)
A communication system which covers a limited geographical area, as
distinguished from a Wide Area Network which spans a wide
geographical area.
Light Emitting Diode (LED)
A device that emits light at a power level well within guidelines for
eye safety. LEDs are typically used to indicate the operating status of a
repeater or module.
Link Test
A test that is performed by the hardware to ensure the integrity of the
cable. The link test can be disabled to allow old style NICs incapable
of performing a link test to connect to the repeater.
modular cord
A cord containing four twisted pairs of wires, with a modular plug on
one or both ends.
module
The component that provides connectivity ports for the LAN. Modules
are installed in larger systems, called concentrators.
Network Interface Card (NIC)
A card which plugs into a device and allows it to be connected to a
network.
node
A device that is attached to a network and communicates by means of
the network. Any network station