User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2-7
Compaq Netelligent 1017A/B 10Base-T Hub User Guide
Writer:
Chris Seiter
Project:
Hardware Description
Comments:
File Name:
1017A_2.DOC
Last Saved On:
6/26/97 3:05 PM
Setting the Uplink Switch
The uplink switch is located on the right side of the front panel beside Port 16.
It enables or disables the uplink function of Port 16. When the switch is
enabled, Port 16 functions as an uplink port for connecting to another
compatible hub. When the switch is disabled, Port 16 functions as a normal
station port for connecting to a workstation. To enable the uplink capability,
slide the uplink switch to the right (MDI). To disable the uplink capability, slide
the switch to the left (MDI-X).
Figure 2-4
. Uplink Switch Setting
Back Panel
This section describes the hub's back panel components.
Figure 2-5
. 1017A/B Hub Back Panel