User manual

Etherboot User Manual
Georg Baum
contributed a Schneider & Koch G16 driver.
jluke AT deakin PERIOD edu PERIOD au
sent in a fix for the WD/SMC8013 which I finally verified.
Mark Burazin
contributed a fix for Compex RL2000 NICs.
Matthias Meixner
found a receive status bug in the RTL8139 driver.
Jim McQuillan
provided changes to support the SMC1211 which uses the RTL8139 chip.
Steve Smith
Extended the 3c905b driver for other members of the 90x family. Be sure to read the release notes
in 3c90x.txt before using. Modified loader.S for some BIOSes that don’t behave correctly with
INT19H.
John Finlay
Wrote a utility for programming EEPROMs on 3c90x in situ.
Nick Lopez
Contributed change to tulip.c to handle Macronix 98715 (Tulip clone).
Matt Hortman
Contributed fix to eepro100 driver that fixes incorrect latency setting. Also Makefile rule for .lzfd0.
Marty Connor
Contributed new Tulip driver ntulip.c. Reduced RTL8139 footprint. Added support for Netgear
FA310TX (Tulip clone, LC82C168 chip). Support for 3Com905C. Romutil for 905C, which have
block erase EEPROMs. Contributed the development of liloprefix.S through thinguin.org. Finally
made the ROM images conformant PnP boot ROM images. Wrote the SiS900 driver. Made Tulip
driver work for many more variants. Wrote the National Semiconductor DP83815 driver, under
funding from Sicom System (http://www.sicompos.com/).
Anders Larsen
contributed mkQNXnbi, for generating boot images from QNX kernels.
Bernd Wiebelt
contributed code to request vendor tags in DHCP.
Paolo Marini
contributed the Via-Rhine driver.
27