User guide

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3-7
Compaq Netelligent 1016 10Base-T Unmanaged Repeater User Guide
Writer: Liz Fischer Project: Setting Up the Repeater Comments: 268749-001
File Name:749_3.doc Last Saved On:6/25/96 9:30 AM
Brown-White 8
White-Brown 7
Green-White 6
Blue-White 5
White-Blue 4
White-Green 3
Orange-White 2
White-Orange 1
1 White-Orange
2 Orange-White
3 White-Green
4 White-Blue
5 Blue-White
6 Green-White
7 White-Brown
8 Brown-White
Figure 3-3. D-Inside Wire
The cable in Figure 3-4 shows how the wire connected to Pin 1 must be twisted
with the wire connected to Pin 2, and the wire connected to Pin 3 must be
twisted with the wire connected to Pin 6. Pins 4, 5, 7, and 8 are reserved for
telephone and other services.
Plug Pin #
Plug Pin #
Receive Pair
Transmit Pair
1
3
3
1
2
6
6
2
Figure 3-4. Receive/Transmit Pair
Each RJ-45 jack on the repeater has the 10Base-T standard pin-out shown
below. A straight-through cable using the pair combinations below provides the
appropriate 10Base-T connection between the repeater and the workstation.
Table 3-2
10Base-T Pin-Out
1 TD+
2 TD-
3 RX+
6 RX-